Jump to content

Ableteccom C1 Datasheet -

You're looking for a good feature analysis of the "AbleTec COM C1 Datasheet".

The AbleTec COM C1 is a single-board computer module, and its datasheet provides detailed specifications and features. Here's a summary of its key features:

Overview

The AbleTec COM C1 is a compact, low-power, and highly integrated computer-on-module (COM) designed for industrial and embedded applications.

Key Features

  1. Processor: The COM C1 is powered by an Intel Atom E3825 or E3815 processor, providing a balance between performance and power consumption.
  2. Memory: The module supports up to 4GB of DDR3L RAM and 64GB of eMMC storage.
  3. Display: The COM C1 supports dual-display capability, with 1x VGA and 1x LVDS (or 1x DisplayPort).
  4. Networking: The module features 1x Gigabit Ethernet MAC and 1x USB 2.0 host.
  5. Expansion: The COM C1 offers 1x mini-PCIe slot, 1x SD/MMC card socket, and 1x SIM card socket.
  6. Power Management: The module has a wide power input range (9-36V) and features a power management IC for efficient power consumption.
  7. Operating Temperature: The COM C1 is designed to operate in a wide temperature range (-40°C to 85°C).

Interfaces

The COM C1 provides various interfaces, including:

  1. Audio: 1x Audio (Line-out, Mic-in)
  2. USB: 1x USB 2.0 host, 1x USB 2.0 device (optional)
  3. Serial: 2x RS-232
  4. GPIO: 1x 10-pin header for GPIO, 1x 6-pin header for power and reset

Software Support

The AbleTec COM C1 supports various operating systems, including:

  1. Microsoft Windows 10/8.1/7
  2. Linux (e.g., Ubuntu, Debian)
  3. Android

Certifications and Compliance

The COM C1 meets various industrial and regulatory standards, including:

  1. CE: Compliant with EU's Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC) directives.
  2. FCC: Compliant with US Federal Communications Commission regulations.

Keep in mind that this summary provides an overview of the AbleTec COM C1's features and specifications. For detailed information, I recommend consulting the official datasheet.

The ABLETEC.COM.C1 (C1) is an SOP-16 integrated circuit utilized as a controller in high-performance Class D amplifier modules from Abletec, which is now part of Anaview. This IC is commonly found in modules like the ALC0180-2300, supporting high-efficiency, 100W-240W, high-bandwidth audio applications. For technical details on the modules that use this IC, you can refer to the Anaview ALC0100 Series Documentation.

product data sheet audio line combination alc0180-2300 scope

Ableteccom C1 (often marked as ABLETEC.COM C1 ) is a high-performance Class-D audio amplifier control IC housed in a SOP-16 package

. While a full manufacturer datasheet is not publicly hosted on a single central repository, technical details can be inferred from its integration in high-end audio products and its compatibility with other industry-standard drivers. Core Technical Specifications Package Type : SOP-16 (16-pin Small Outline Package).

: Primarily used as a modulator or controller for Class-D power amplifier stages. Compatibility

: It is often cited as compatible with or used alongside the automotive-grade Class-D driver IC. Application

: Found in high-fidelity audio systems, professional power amplifiers (like those from DSonic), and automotive audio electronics. AliExpress Key Performance Attributes Original 5PCS/ ABLETEC.COM.C1 ABLETEC.COM SOP-16 ableteccom c1 datasheet

ABLETEC COM C1 Datasheet: A Comprehensive Guide

The ABLETEC COM C1 is a highly versatile and efficient communication module designed for a wide range of industrial and commercial applications. As a leading provider of innovative electronic solutions, ABLETEC has established itself as a trusted name in the industry, and the COM C1 datasheet is a valuable resource for engineers, developers, and manufacturers looking to integrate this cutting-edge technology into their projects.

In this article, we will provide an in-depth analysis of the ABLETEC COM C1 datasheet, exploring its features, specifications, and applications. Whether you're a seasoned professional or a newcomer to the world of electronic design, this comprehensive guide will help you understand the capabilities and potential of the ABLETEC COM C1.

Overview of the ABLETEC COM C1

The ABLETEC COM C1 is a compact, high-performance communication module that enables seamless data exchange between devices, systems, and networks. With its advanced design and robust construction, this module is ideal for use in a variety of environments, from industrial automation and control systems to medical devices, transportation, and more.

Key Features and Specifications

The ABLETEC COM C1 datasheet provides a detailed overview of the module's key features and specifications, including:

Detailed Specifications

The ABLETEC COM C1 datasheet provides a comprehensive list of detailed specifications, including:

Applications and Use Cases

The ABLETEC COM C1 datasheet highlights the module's versatility and suitability for a wide range of applications, including:

Conclusion

The ABLETEC COM C1 datasheet provides a comprehensive overview of the module's features, specifications, and applications. With its advanced design, robust construction, and versatility, the COM C1 is an ideal solution for a wide range of industrial and commercial applications. Whether you're a seasoned professional or a newcomer to the world of electronic design, this datasheet is a valuable resource for engineers, developers, and manufacturers looking to integrate this cutting-edge technology into their projects.

Additional Resources

For more information on the ABLETEC COM C1 datasheet, please visit the ABLETEC website or contact their technical support team. Additional resources, including user manuals, software drivers, and design guides, are also available to help you get started with your project.

FAQs

Q: What is the operating voltage range of the ABLETEC COM C1? A: The COM C1 operates within a voltage range of 3.3V to 5V.

Q: What communication protocols are supported by the COM C1? A: The COM C1 supports RS-232, RS-485, USB, and Ethernet communication protocols. You're looking for a good feature analysis of

Q: What is the maximum data transfer rate of the COM C1? A: The COM C1 supports data transfer rates of up to 115,200 bps (RS-232) and 1 Mbps (RS-485).

Q: What is the temperature range of the COM C1? A: The COM C1 is designed to operate within a temperature range of -40°C to +85°C.

By providing a detailed analysis of the ABLETEC COM C1 datasheet, this article aims to help engineers, developers, and manufacturers understand the capabilities and potential of this versatile communication module. Whether you're working on a new project or looking to upgrade an existing system, the COM C1 is an excellent choice for a wide range of industrial and commercial applications.

The Abletec C1 (often listed as ABLETEC.COM.C1) is a 16-pin Integrated Circuit (IC) in an SOP-16 package primarily used as a driver or control component in high-performance Class D audio amplifiers.

While it is commonly found on AliExpress and electronic component trading sites, it is a specialized part rather than a general-purpose consumer chip. 🛠️ Key Technical Specifications

Based on industrial listings and its application in Anaview/Abletec amplifier modules, here are its primary roles:

Function: Specialized IC designed for high-frequency switching and precise voltage regulation.

Integration: Frequently interfaces with high-voltage half-bridge drivers like the IRS20956. Package: SOP-16 (16-pin Small Outline Package).

Application: Automotive-grade environments and high-end audio amplification where signal synchronization and thermal management are critical. Common Applications in Audio

The "C1" chip is an internal component of the larger Abletec ALC Series amplifier modules used by brands like TEAC and Shanling . Max Power Output Devices Using This Tech 50W x 2 @ 4Ω Shanling EA5 Streamer 120W x 2 @ 4Ω TEAC AX-501 Amplifier 320W x 1 @ 4Ω Custom Monoblocks & Subwoofers 🔍 Related Components

If you are looking for a replacement or a detailed datasheet, searching for these related parts often provides more comprehensive circuit diagrams:

IRS20955 / IRS20957: The core Class D ICs that often work alongside the Abletec control logic.

Anaview ALC Series: The parent company (Anaview) acquired Abletec; their technical documentation covers the full module pinouts.

Are you looking to replace a damaged chip in an amplifier, or are you designing a new circuit using this module?

All-In-One Music Centre_Shenzhen Shanling ... - Shanling EA5

The Abletec C1 (often referred to under the Anaview/Abletec brand) is a high-performance Class D amplifier module primarily known for its compact footprint and integrated power supply design. It is frequently utilized in professional audio equipment, active loudspeakers, and high-fidelity DIY projects due to its efficiency and low heat dissipation. Abletec C1 Technical Overview

The Abletec C1 (and its ALC series variants) represents a specialized category of "all-in-one" boards. Unlike traditional Class D modules that require a separate Switch Mode Power Supply (SMPS), the C1 integrates the mains power input directly onto the PCB. Amplifier Topology: Class D (Pulse Width Modulation).

Configuration: Typically single-channel (Mono) or bridgeable. Processor : The COM C1 is powered by

Integrated Power Supply: Built-in universal AC input (typically 100V–240V).

Protection Circuitry: Features integrated protection against over-current, over-voltage, and thermal runaway. Key Specifications

While specific revisions exist (such as the ALC0180 or ALC0300), the C1 baseline datasheet typically highlights the following parameters: Specification (Typical) Power Output (4Ω) 100W – 120W (RMS) Power Output (8Ω) ~50W (RMS) Efficiency > 85% at full power Frequency Response 20Hz – 20kHz (+/- 0.5dB) Input Type Balanced / Single-ended compatible THD+N < 0.05% at rated power Thermal Management No external heat sink required for standard operation Applications and Use Cases

The Abletec C1 is highly regarded for its "plug-and-play" nature for system integrators.

Active Studio Monitors: Its small size allows it to be mounted directly inside speaker cabinets without occupying significant internal volume.

Hifi DIY Builds: Popular in the DIY community (often sourced through AliExpress) for building "monoblock" amplifiers.

Professional Audio: Used in rack-mount equipment where power density is critical. Design Benefits

Low Noise Floor: The module is engineered for ultra-low residual noise, often measured at less than (unweighted).

Compact Form Factor: By combining the PSU and amplifier, the C1 reduces the need for complex wiring and multiple internal components.

Green Energy Compliance: Meets modern efficiency standards like EnergyStar and ErP, drawing less than 1W in standby mode.

For detailed technical integration, you can often find the official Anaview ALC series product data sheets provided by authorized distributors like LautsprecherShop.

Communication Interfaces

The C1 shines in its interface versatility.

High-Performance Class D Audio Amplifier Module

Manufacturer: Abletec AS Category: Professional Audio / OEM Amplifier Modules Device Type: 2-Channel (Stereo) Class D Amplifier with Integrated Power Supply

1. Overview: What is the Ableteccom C1?

Before diving into the raw specifications, it is essential to understand what the Ableteccom C1 is and where it fits in the industrial landscape. The C1 is a compact, multi-functional industrial controller / interface module designed for bridging legacy systems with modern IoT (Internet of Things) protocols.

It is not a single-purpose chip or a basic sensor. Instead, the Ableteccom C1 is best described as a programmable edge-computing gateway. Its primary roles include:

The "C1" in the nomenclature typically indicates the first generation of the Classic series, striking a balance between processing power and energy efficiency (under 2.5W typical power draw).

What is the Abletec C1?

The Abletec C1 is a Class D Audio Amplifier Module designed for high-performance audio applications. Unlike traditional linear amplifiers (Class A/B), the C1 utilizes switching technology to deliver high power output with minimal heat generation.

This module is typically found in active studio monitors, professional installation speakers, and high-end consumer electronics.

×
×
  • Create New...

 Functionarea acestui site este sustinuta de cele cateva bannere afisate intre posturi. Ar fi o placere pentru noi daca ar fi adaugat site-ul nostru in lista de exceptii ad-block in browserul tau. Promitem si veti vedea ca nu avem reclame intruzive si nici deranjante (nimic cu sunet,video sau all-screen). Multumim!  

Nu sunt de acord (nu vizitez)
Sunt de acord 👍