Adjustment Program Epson 1390 Resetter

Adjustment Program Epson 1390 Resetter: The Ultimate Guide to Fixing Service Required Errors

"Service Required" is a message that every Epson Stylus Photo 1390 owner dreads. Just when you need to print a high-quality A3 photo, your printer suddenly stops, and the red lights begin to flash alternately. This isn't a mechanical failure; it is a programmed safety limit.

To get your printer back to work, you need the Epson 1390 Adjustment Program (Resetter). In this guide, we will walk you through what this software is, why you need it, and how to use it safely. What is the Epson 1390 Adjustment Program?

The Epson 1390 Adjustment Program is a specialized utility tool used by technicians to maintain and repair Epson printers. Its most common use for home and office users is resetting the Waste Ink Pad Counter.

Every time you print or clean your print head, a small amount of ink is pumped into internal sponges called waste ink pads. Epson printers use a built-in counter to track this. Once the counter reaches 100%, the printer locks itself to prevent ink from overflowing and damaging the internal electronics. Common Symptoms of a Full Counter

Before you download the resetter, ensure your printer is actually experiencing a "Counter" issue. The signs include:

Status Monitor Message: A popup on your computer says "Service Required."

Flashing Lights: The Power light, Paper light, and Ink light flash alternately (one after the other). Adjustment Program Epson 1390 Resetter

Total Lockout: The printer refuses to perform any functions, including scanning or cleaning. How to Use the Epson 1390 Resetter (Step-by-Step)

Note: Before starting, disable your Antivirus temporarily, as many security programs flag reset utilities as "False Positives" because they interact with hardware ports.

Connect Your Printer: Ensure your Epson 1390 is connected to your PC via a USB cable and turned on. Run the Software: Open the AdjProg.exe file.

Select Model: Click the "Select" button. Choose Stylus Photo 1390 from the model list and click OK.

Enter Maintenance Mode: Click on "Particular Adjustment Mode."

Waste Ink Pad Counter: Scroll down the list, select "Waste ink pad counter," and click OK.

Check the Status: Click the "Check" button. This will show you the current percentage and point count. Adjustment Program Epson 1390 Resetter: The Ultimate Guide

Reset: Check the box next to "Main pad counter" and click "Initialization."

Power Cycle: A popup will tell you to turn off your printer. Turn the printer off, then click OK. Turn the printer back on.

Your printer should now be back to its normal state with a 0% counter! Important Warning: The Physical Hardware

Resetting the software is only half the battle. Because the printer "thinks" the ink pads are empty, you must remember that the physical pads are still saturated with old ink.

Clean the Pads: If you reset the printer more than twice without cleaning or replacing the pads, ink will eventually leak out of the bottom of the printer.

External Waste Tank: Many 1390 users install an "External Waste Ink Bottle" kit. This bypasses the internal sponges and collects the waste ink in an external jar, making the software reset much safer to perform repeatedly. Conclusion

The Epson 1390 Adjustment Program is a lifesaver for photographers and office workers who rely on this A3 workhorse. By resetting the Waste Ink Pad Counter, you save hundreds of dollars in professional repair fees and avoid the landfill. Just remember to keep an eye on your physical ink sponges to keep your workspace clean. How to Use the Epson 1390 Resetter (Step-by-Step)

Here is comprehensive content regarding the Epson 1390 Adjustment Program (Resetter). You can use this text for a blog post, a download page, or a support guide.

How to Use the Epson 1390 Resetter (Step-by-Step)

Note: Always ensure your printer is connected to the computer via USB and is turned on before starting.

Step 1: Download and Extract Download the software (usually a .zip or .rar file). Extract it to a folder on your desktop.

• Tip: Disable your antivirus temporarily during extraction, as these tools are often flagged as "false positives."

Step 2: Run the Program Look for the AdjProg.exe file inside the extracted folder. Right-click and select "Run as Administrator".

Step 3: Select Your Printer

1. In the first window, click "Select".
2. Choose EPSON Stylus Photo 1390 from the "Model Name" dropdown.
3. Ensure the USB port is selected (it usually says USB001 or similar).
4. Click OK.

Step 4: Access Particular Adjustment Mode

1. Back at the main menu, click "Particular adjustment mode".
2. This opens the list of maintenance functions.

Step 5: Reset the Counter

1. Under the "Maintenance" section, find and click on "Waste ink pad counter".
2. Click OK.
3. You will see check boxes for "Main pad counter" and "Platen pad counter". Check both.
4. Click the "Check" button to see the current status.
5. Click the "Initialization" button to reset the counter to zero.
6. Click Finish.

Step 6: Restart the Printer A pop-up will ask you to turn the printer off. Turn the printer off, wait 10 seconds, and turn it back on. The error should be gone.

✅ Disable printer firmware updates

• Never update the firmware on an Epson 1390 if you use third-party ink or a resetter. Newer firmware blocks resetter tools.

Step 2 – Disable antivirus temporarily (if needed)

• Some antivirus programs flag the adjustment program as a hacktool (false positive). Disable real-time protection just during the process.