Amlogic Usb Driver Windows 10 64 Bit

To install Amlogic USB drivers on Windows 10 (64-bit), the most reliable method is to install the Amlogic USB Burning Tool , which includes the necessary drivers in its installation package. Step 1: Download the Amlogic USB Burning Tool

While there is no single official consumer website, reputable community sources like the MINIX Forum CoreELEC Wiki provide verified versions of the tool. Version 2.x

: Generally more stable for older Amlogic chips (S905, S912). Version 3.x amlogic usb driver windows 10 64 bit

: Required for newer Android 11+ devices or chips like the S928X. Step 2: Installation Process Extract the Files : Right-click the downloaded zip file and select "Extract Here" Run the Installer : Double-click the USB_Burning_Tool.exe Install Drivers

: During the setup, a prompt will appear asking to install required device drivers (often labeled "World Cup Device"). Select to permit this. : Once completed, click . The drivers are now registered on your system. Step 3: Verifying the Connection To check if the drivers are working: Amlogic USB Burning Tool Recovery Guide: Revised Tutorial To install Amlogic USB drivers on Windows 10

Safety and backups

• Flashing firmware can brick devices. Always:
  • Back up important data.
  • Use firmware intended for your exact model.
  • Follow manufacturer instructions where available.

Error 3: Driver Installation Fails with "This INF contains no digital signature"

Cause: Windows 10 64-bit requires SHA-256 signed drivers. Older Amlogic drivers (pre-2018) use SHA-1.

Fix:

• Download a newer driver package (V2.2.4 or later).
• Or, manually edit the .inf file: Look for the line CatalogFile=. Delete or comment it out (;CatalogFile=). This is a hack but works.

Install driver (standard method)

1. Unzip the downloaded driver package to a folder.

2. Disable driver signature enforcement temporarily (Windows 10 may block unsigned drivers): Safety and backups

   • Open Settings → Update & Security → Recovery → Advanced startup → Restart now.
   • Troubleshoot → Advanced options → Startup Settings → Restart.
   • On restart press 7 or F7 to “Disable driver signature enforcement.”

3. In the extracted folder, locate the driver installer (Setup.exe) or the INF files. Right-click and choose “Install,” or:

   • Open Device Manager (Win+X → Device Manager).
   • Connect the Amlogic device to PC while holding the device’s required button for firmware mode (varies by device). Device may show as “USB2.0-Serial” or unknown device.
   • Right-click the device → Update driver → Browse my computer → Let me pick → Have Disk → Browse to the INF file → Install.

4. After successful install, device should appear under “Ports (COM & LPT)” or as “Amlogic USB VCOM” with a COM number.