Asmaco Spray Paint Sds -

Deep Dive: ASMACO Spray Paint Safety Data Sheet (SDS)

Section 3: Composition/Information on Ingredients

| Chemical Name | CAS No. | Weight % | |---------------|---------|-----------| | Acetone | 67-64-1 | 15–25 | | Propane/Butane (propellant) | 74-98-6 / 106-97-8 | 20–30 | | Toluene | 108-88-3 | 10–15 | | Xylene (mixed isomers) | 1330-20-7 | 5–10 | | Ethyl acetate | 141-78-6 | 5–10 | | Pigments (e.g., Titanium dioxide) | 13463-67-7 | 1–5 | | Resins & Additives | Proprietary | Balance |

Note: Exact percentages vary by color and finish. Contact Asmaco for specific color formulations.

17. Other Information & Limitations

• Revision date – always verify you have the latest SDS (ASMACO updates every 3–5 years or when formulation changes).
• Training requirement: All users must be trained on the hazards and safe use of aerosol paints.
• Medical surveillance: Recommended for long‑term users (baseline and periodic spirometry, neurological exams).

The SDS does not constitute product performance data – it is purely a hazard communication document. asmaco spray paint sds

14. Disposal Considerations

• Do not puncture or incinerate aerosol cans (even empty).
• Recycle as hazardous waste via RCRA‑permitted facility – aerosol cans are often treated by puncturing/draining under controlled conditions.
• Liquid waste: Incinerate at licensed hazardous waste incinerator.
• Local regulations (e.g., EU Waste Framework Directive, US EPA Subtitle C) apply.

Empty can definition (US DOT): <3% by weight of original contents, and no pressure – but many regulators consider all aerosol cans hazardous until punctured.

Section 14: Transport Information

UN Number: UN1950
Proper Shipping Name: Aerosols, flammable
Transport Hazard Class: 2.1
Packing Group: None
Marine Pollutant: No
Special Precautions: Protect from physical damage and heat during transport. Deep Dive: ASMACO Spray Paint Safety Data Sheet

16. Other Information

• NFPA 704 rating: Health = 2, Fire = 4, Reactivity = 0
• HMIS rating: Health = 2*, Flammability = 4, Physical Hazard = 1

Disclaimer: This summary is for informational purposes only. It is not a substitute for the official Asmacó Safety Data Sheet for your specific product and country. Always read the label on the can and request the full SDS from your Asmacó supplier before use.

Where to Get the Official Asmacó SDS

1. Contact Asmacó directly:
   Asmacó (U) Ltd – Plot 97/99 Jinja Road, Kampala, Uganda
   Email: info@asmaco.com (or your regional office)
2. Check the can: Some Asmacó spray cans include a QR code linking to the SDS.
3. Ask your retailer: Hardware stores (e.g., Jumbo Hardware, Builders’ World, Melcolm Distributors) often have binder copies.

Safety reminder: Asmacó spray paint is designed for industrial and DIY use. Always spray in a well-ventilated area, wear a mask, and keep away from children and open flames. Revision date – always verify you have the

Section 5: Fire-Fighting Measures

Suitable Extinguishing Media: CO₂, dry chemical, foam.
Unsuitable Media: Water jet (may spread fire).
Specific Hazards: Aerosol cans may explode when heated. Vapors are heavier than air and may travel to ignition sources.
Protective Equipment: Wear self-contained breathing apparatus (SCBA) and full firefighting gear.
Special Procedures: Cool exposed containers with water spray from a distance.