Autocom 2020.23 Password Installation Upd

Installing Autocom 2020.23 requires the standard setup password "

" to initiate installation, followed by a separate activation process using a generated FileActivation.xml

. The process involves running the installer as an administrator, installing prerequisites, and using a Keygen to activate the software, with antivirus software often needing to be disabled . Detailed instructions are available in this Scribd document Autocom 2020 Installation Guide | PDF - Scribd

The Autocom 2020.23 installation typically requires a specific password during the initial setup phase, followed by a separate file-based activation process. Installation Password

For many common installers of Autocom 2020.23, the password required to proceed with the setup wizard is: ThankYou Activation Process

Unlike standard software that uses a simple product key, Autocom 2020.23 uses a "FileActivation" method:

Export Activation File: After the initial installation, run the software. When prompted, click the "Export" button to save a file named FileActivation.xml to your desktop.

Activate the XML: This file usually needs to be sent to the software provider or run through a "keygen" (key generator) tool to be activated.

Import & Finish: Once you receive the activated file back, import it into the software to unlock full functionality. Critical Technical Requirements

System Date: Some versions of this software require you to set your computer's system date to December 15, 2021 (15.12.2021) for the activation to trigger correctly.

Antivirus: It is highly recommended to disable your antivirus during installation and activation, as the "activator" files are often flagged as false positives.

Bluetooth Pairing: If you are prompted for a password while pairing the diagnostic unit (VCI) via Bluetooth, the default PIN is usually 0000. Installation Resources

Detailed step-by-step PDF guides and walkthroughs can be found on platforms like Scribd and specialized diagnostic sites like x-easydiag.ru. If you'd like, let me know:

If you are getting a specific error message (like "Please enter a valid license key")

If you have the keygen tool or need to know where to find one Which hardware you're using (e.g., DS150E) Autocom 2020 Installation Guide | PDF - Scribd

Installing Autocom 2020.23 typically involves a two-step "password" process: a literal installer password and a software activation file. 1. Installer Password

During the initial setup of many 2020.23 distributions, the installer will prompt for a password to proceed. The most common default password used by various software providers for this version is: 2. Software Activation

The "main" barrier to installation is the software activation, which replaces a traditional product key. System Date:

Before beginning activation, some versions require you to set your PC system date to 15.12.2021 to bypass certificate errors. FileActivation.xml: After installing the software, you must run it and select to save a file named FileActivation.xml Activation:

This file is typically sent to the software seller or processed through a "Keygen" or "Activator" tool to generate a working license. 3. Bluetooth Pairing

If you are looking for the password to pair your Autocom hardware with your PC via Bluetooth: Default PIN: Autocom.co.uk during the activation process? Autocom 2020 Installation Guide | PDF - Scribd

The Autocom 2020.23 release is a major diagnostic software update that significantly expands vehicle database coverage compared to previous 2013-based versions . It is frequently used with Delphi DS150E Autocom CDP+ interfaces to diagnose vehicles up to the year 2020. Key Features & Performance Expanded Database

: Supports a much larger range of passenger cars and heavy-duty trucks through 2020. Modern Interface : Features a redesigned, intuitive user interface. Native Installation

: Unlike many older "unlocked" versions, this can be installed directly on Windows without requiring a bulky Virtual Machine (VMware), leading to faster performance. Functional Depth

: Capable of reading/clearing fault codes, real-time data monitoring, and advanced ECU programming (e.g., reprogramming BMW DME units or clearing dealership-level management faults). Installation & Password Guide

Most community versions of Autocom 2020.23 require a specific password during the initial extraction or setup phase. Setup Password

: The most common password used in many widely distributed installers is System Date Trick

: A critical step for activation success is often setting your PC system date to 15.12.2021 during the installation and activation process. Antivirus Notice : Most installers recommend disabling antivirus

and Windows Defender temporarily, as activation tools (keygens) are often flagged as false positives. Typical Step-by-Step Process : Run the installer and enter the password when prompted. Date Adjustment : Change your computer's date to December 15, 2021 Run Installer

: Follow the wizard, install prerequisites like SQL Compact and drivers, and restart. Export Activation

: Open the software (CARS or TRUCKS), enter an email, and click "Export FileActivation.xml" : Send this

file to your vendor or use an included keygen to generate the activation code, then import it back into the program. System Requirements Recommended Windows 7 (64-bit) Windows 10/11 (64-bit) Intel Core i5 or better autocom.se

: For those looking for the most official path, Autocom now uses a USB security dongle (ICON unit) and a Secure Gateway account for modern activations. autocom.se Are you having trouble with a specific error message during the activation process? Autocom 2020 Installation Guide | PDF - Scribd

The installation of Autocom 2020.23 involves specific security steps, including a password for the initial setup and a separate activation process for the software's functional database. Installation Password

The standard password required during the initial setup of the Autocom 2020 installer is: ThankYou Step-by-Step Installation Process

Preparation: Disable all antivirus software and Windows Defender, as they may incorrectly identify key components or activators as threats. Run Installer: Launch the provided installer file.

Enter Password: When prompted, enter the password ThankYou to proceed with the file extraction and installation.

Prerequisites: Follow the prompts to install necessary drivers and dependencies, such as SQL Compact and Microsoft Visual C++.

Reboot: Restart your computer once the core installation is complete to finalize driver integration. Software Activation (FileActivation.xml)

After the software is installed, it must be activated before it can communicate with a VCI (Vehicle Communication Interface):

Launch Software: Open the Autocom "Cars" or "Trucks" application.

Export Activation File: Click the "Export" button when prompted to save a file named FileActivation.xml to your desktop.

Activate File: Use a keygen (if provided with your download) or send this XML file to your software provider to receive an activated version.

Import Activation: Paste the provided activation code into the software or import the returned XML file to unlock all features. Alternative: VMware Version

For users who wish to avoid manual activation and system configuration, a VMware (virtual machine) version is common. This version comes pre-activated and pre-configured; you simply need to install VMware Workstation and open the provided .vmx file. Autocom 2020 Installation Guide | PDF - Scribd autocom 2020.23 password installation

Installing Autocom 2020.23 typically involves a specific activation process rather than a single static password. Because this software is often distributed as a modified or "unlocked" version of the original diagnostic suite, the "password" or activation usually refers to the FileActivation.xml process. Installation & Activation Guide

To successfully install and activate Autocom 2020.23, follow these standard procedural steps: 1. System Preparation

Disable Antivirus: Most "keygens" or activation patches are flagged as false positives. Disable Windows Defender and any third-party antivirus before extracting files.

System Requirements: Ensure you have .NET Framework 4.5.1 (or higher) installed on Windows 7, 10, or 11. 2. Software Installation

Run the Main.exe or Setup.exe file found in the installation folder.

Follow the prompts to install the software to your local drive (usually C:\Autocom 2020.23). 3. Generating the Activation File

When you launch the program for the first time, it will ask for a Serial Number and Hardware Key. Common Generic Serial: 100251

Click "Next" and the software will prompt you to save a file named FileActivation.xml. Save this to your desktop. 4. The "Password" (Activation Step)

The "password" in this context is the activated version of that XML file. You generally have two options:

Self-Activation: If your download included a Keygen.exe, open it, load your FileActivation.xml, click Activate/Patch, and save the new version.

Manual Activation: Some distributors require you to send this XML file to them via email or a forum thread to receive the "unlocked" version back. 5. Finalizing Installation

In the Autocom startup window, click Open (or "Load") and select the newly patched FileActivation.xml.

The software will process the file and launch the full diagnostic interface. Common Troubleshooting

"Wrong Password" on Archive: If the .zip or .rar file itself requires a password to extract, check the source website. Common default passwords are often 1234, auto, or the URL of the site you downloaded it from.

VCI Update: Once installed, connect your hardware (VCI) via USB and run the Firmware Update within the software settings to ensure the hardware is compatible with the 2020.23 version.

How to Install Autocom 2020.23: A Complete Activation and Password Guide

If you are a car enthusiast or a professional mechanic, you likely know that Autocom 2020.23 is one of the most stable and popular versions of this diagnostic software. It offers extensive vehicle coverage and a redesigned interface compared to older versions like 2017.3.

However, the installation process—specifically dealing with the FileActivation and the required installation password—can be tricky. This guide will walk you through the steps to get your software up and running. Prerequisites Before You Start

Before downloading or running the installer, ensure your system is ready to prevent the software from being flagged or corrupted:

Disable Antivirus/Windows Defender: Most Autocom 2020.23 packages include a "keygen" or "patch" that Windows will incorrectly flag as a virus. Turn off real-time protection during installation.

Install .NET Framework 3.5 & 4.8: The software relies on these libraries to function correctly.

Check OS Compatibility: Autocom 2020.23 works best on Windows 10 or 11 (64-bit), though it can run on Windows 7 SP1. Step-By-Step Installation Guide 1. Extracting the Files

After downloading the software, extract the RAR or ZIP archive.

The Password: Most reputable sources for this software protect the archive with a password (often 123 or the name of the website you downloaded it from). Check the "ReadMe" text file included in your download for the specific archive password. 2. Running the Setup Launch the Main.exe or Setup.exe.

The Installation ID: During the initial setup, the program may ask for a password or ID to begin the installation. For version 2020.23, the universal installation password is often: thankyou (all lowercase). 3. Generating the Activation File

Once the software is installed, it will not open immediately. It will prompt you to save a file. Click Export or Save when the activation window appears. Save the FileActivation.xml file to your desktop. 4. The Activation Process (The "Password" Step)

This is where most users get stuck. To activate version 2020.23, you usually need a Keygen (Key Generator).

If you have the Keygen: Open it, click "Activate File," select the FileActivation.xml you saved, and it will patch the file.

If you don’t have a Keygen: Many sellers or forums provide "free activation" where you must email your FileActivation.xml to them, and they return a "unlocked" version. 5. Finalizing Activation Go back to the Autocom software window. Click Import or Open. Select the patched FileActivation.xml.

The software will initialize, update its database, and finally launch the main dashboard. Connecting to Your VCI (Vehicle Communication Interface)

Once the software is open, you need to link it to your hardware (the CDP+ or Delphi snooper box):

Connect the VCI to your PC via USB and to a car’s OBD2 port (to provide power). Go to Settings > Hardware Setup. Select the correct COM Port.

Click Update Firmware. This is crucial for 2020.23 to work with older hardware. Troubleshooting Common Issues

"Operation Failed": This usually means your antivirus deleted a file during extraction. Re-extract with the antivirus off.

Invalid Password: If thankyou doesn't work, double-check the folder for a .txt file containing the specific key for that build.

VCI Not Found: Ensure your drivers are installed. They are usually located in the C:/Autocom/Drivers folder.

Disclaimer: This article is for educational purposes. Ensure you are using software in compliance with local licensing laws and from trusted sources to avoid malware.

Autocom 2020.23 installation, the setup process typically requires a password during the initial extraction or installer phase. Primary Installation Password

The most commonly reported password for the 2020.23 installer is: Step-by-Step Installation Write-up

Follow these steps to ensure a smooth installation, as this version often requires specific environment settings: Disable Antivirus

: Before starting, disable your antivirus or Windows Defender. The "Keygen" or activation files are frequently flagged as false positives and may be deleted automatically. Adjust System Date

: Some versions of this software require you to set your PC date to 15.12.2021

(December 15, 2021) for the activation to work correctly. If you receive a "Please enter a valid license key" error, verify this date. Run Installer

: Double-click the setup file. When prompted, enter the password and proceed. Prerequisites Installing Autocom 2020

: The installer may attempt to install SQL Compact or specific drivers. If you see an error here, it usually means a newer version is already on your system, and you can skip it. Activation Once installed, run the Cars or Trucks application. You will likely need to export a FileActivation.xml

Use the provided Keygen/Activator (if included in your download) to activate this file, or send it to your supplier if they provide activation services. Bluetooth Pairing

: if you are connecting your hardware via Bluetooth, the default pairing pin is typically

For a visual walkthrough, you can refer to video guides such as How To Install Autocom 2020.23 or detailed documentation on during the activation phase?

Feature: Autocom 2020.23 Password Installation

Overview

Autocom 2020.23 is a popular diagnostic and repair tool for vehicles, and installing a password is an essential step to ensure secure access to the software. In this feature, we will guide you through the process of installing a password for Autocom 2020.23.

What is Autocom 2020.23?

Autocom 2020.23 is a diagnostic and repair tool used by automotive professionals to diagnose and repair vehicles. The software provides a comprehensive range of tools and features to help technicians diagnose and fix problems with modern vehicles.

Why is a Password Required?

A password is required to prevent unauthorized access to the Autocom 2020.23 software and to protect sensitive vehicle data. By installing a password, you can ensure that only authorized personnel have access to the software and can use it to diagnose and repair vehicles.

Step-by-Step Guide to Installing a Password for Autocom 2020.23

  1. Launch Autocom 2020.23: Start by launching the Autocom 2020.23 software on your computer.
  2. Click on "Settings": Click on the "Settings" icon in the top right corner of the software interface.
  3. Select "Security": In the settings menu, select the "Security" option.
  4. Click on "Password": In the security menu, click on the "Password" option.
  5. Enter New Password: Enter a new password in the "New Password" field. Make sure to choose a strong and unique password.
  6. Confirm New Password: Confirm the new password by re-entering it in the "Confirm New Password" field.
  7. Click "OK": Click "OK" to save the new password.

Password Requirements

When creating a password for Autocom 2020.23, make sure to follow these requirements:

Troubleshooting Tips

If you encounter any issues during the password installation process, here are some troubleshooting tips:

Conclusion

Installing a password for Autocom 2020.23 is a straightforward process that can be completed in a few steps. By following this guide, you can ensure that your Autocom 2020.23 software is secure and protected with a strong and unique password. If you have any issues or concerns, refer to the troubleshooting tips or contact the software support team for assistance.

Autocom 2020.23 Password & Installation Guide Autocom 2020.23 is one of the most popular diagnostic software versions for mechanics and car enthusiasts using CDP+ or Delphi interfaces. However, the installation process can be tricky—especially when it comes to the FileActivation process and the required passwords.

This guide walks you through the step-by-step installation and how to handle the activation requirements. 1. System Requirements

Before starting, ensure your PC meets these specifications to avoid software crashes: OS: Windows 7 SP1, 8, 10, or 11 (64-bit recommended). RAM: Minimum 4GB. Storage: At least 3GB of free space. Framework: .NET Framework 4.5.1 or higher.

Crucial Step: Disable your Antivirus and Windows Defender before downloading and extracting. Many diagnostic tools are flagged as "False Positives" because of the keygen components. 2. Step-by-Step Installation Process Step 1: Extract the Files

Download the Autocom 2020.23 package. If the RAR file asks for a password just to extract, it is usually provided by the uploader (common passwords include 123, autocom, or the website URL where you found it). Step 2: Run the Setup

Locate the main.exe or setup.exe file. Right-click it and select Run as Administrator. Follow the on-screen prompts to install the software to your C: drive. Step 3: The Activation Password

During the first launch, the software will ask for an Email and Password.

In most 2020.23 versions, you can enter any dummy email (e.g., test@test.com). The system will then generate a "FileActivation.xml" file. 3. How to Activate Autocom 2020.23

Unlike older versions that used simple serial keys, 2020.23 requires a file activation: When the software opens, click Export. Save the FileActivation.xml to your desktop.

The Keygen: You will need a 2020.23 Keygen. If your download didn't include one, you may need to send this XML file to your seller or use a community "activator" tool.

Run the Keygen, load your XML file, and click Activate/Generate.

Back in the Autocom software, click Import and select the now-activated XML file. The software will restart and should be fully functional. 4. Common Troubleshooting "Invalid Password" Errors

If you are prompted for a password during the software's internal update, do not attempt to update online. These versions are modified; an official update will lock the software. Hardware ID (HWID) Issues

If the keygen doesn't work, ensure your Hardware ID matches the one displayed in the Autocom "System Configuration" menu. If you change your hard drive or motherboard, you will need to repeat the activation process. VCI Not Found If the software is installed but won't talk to your car: Go to Settings > Hardware Setup. Connect your VCI via USB.

Click Update Firmware. This is necessary to sync the software version with your physical CDP+ device.

The Autocom 2020.23 password installation mostly hinges on the FileActivation.xml exchange. Always keep a backup of your activated XML file so you don't have to repeat the process if you accidentally delete the software.

Installing AutoCom 2020.23 is a multi-step process that requires specific configuration settings, particularly regarding the system date and the installation password, to bypass common activation errors. 1. System Preparation and Date Modification

Before starting the installation, it is critical to adjust your system date. The activation window for this specific release is tied to a specific timeframe. For a successful install, you must change your PC date to December 15, 2021. Failure to do this often results in the installer failing to recognize the activation key or preventing the setup from finishing. 2. The Installation Password

When you run the autocom_release_2020.23 FULL.exe installer, you will be prompted for a password to unlock the setup files. Common Password: ThankYou.

Ensure that you are running the Setup.exe or the installer as an Administrator to prevent permission-related blocks during the extraction process. 3. Connection and Driver Management

To ensure a clean installation, follow these connectivity and driver steps:

Disconnect from the Internet: Turn off Wi-Fi and Ethernet. The installer may attempt to perform internet checks that can block the process.

Clean Existing Drivers: If you have previous versions of AutoCom or Delphi installed, uninstall them via the Device Manager and check "Delete the driver software for this device" to avoid hardware conflicts. 4. Keygen and Final Activation

Once the base files are installed, the software requires manual activation:

Keygen Files: Copy the contents of the /keygen folder and paste them into the installation directory (usually C:\Program Files\Autocom\).

Hardware ID: Run the KEYGEN.EXE to generate your hardware-specific activation code. This binds the software to your specific PC hardware ID. Launch Autocom 2020

Reboot: After the license is generated and saved, a full system reboot is often required for the software to recognize the DS100 or VCI dongle correctly. Troubleshooting Tips

Operating Systems: While the 2020.23 version runs smoothly on Windows 10 and 8.1 (64-bit), users have reported significant issues attempting to run the native installation on Windows 7 (32-bit).

Antivirus Alerts: Many activation tools for AutoCom are flagged as "False Positives" by antivirus software. You may need to temporarily disable your protection or add an exception to the installation folder.

Important legal notice:
Sharing or using cracked passwords, keygens, or unauthorized activation codes for commercial software violates copyright laws and the software’s license agreement. The following information is provided for educational and legacy troubleshooting purposes only. You should own a valid license or subscription.

Password setup (software access / admin password)

  1. Launch Autocom application as Administrator (right-click → Run as administrator).
  2. Go to Settings → User Management (or Administration → Users).
  3. Create new user: enter username (e.g., tech), set role (Admin/Operator).
  4. Set a strong password: at least 12 characters, mix of upper/lower, digits, symbols.
  5. Save and test login by logging out and back in.

If the application uses a separate database password:

Part 5: Troubleshooting the Autocom 2020.23 Password Installation

Even with the correct password, you may see errors. Here is how to resolve them.

| Error Message | Likely Cause | Solution | |---------------|---------------|----------| | Wrong password. Installation aborted | Typo, case sensitivity, or incorrect version password | Re-enter manually. Verify if password is for 2020.23 (not 2020.22 or 2021). | | Password accepted, but installation freezes at 78% | Corrupt installer or antivirus interference | Disable antivirus, delete temp files, restart installation. | | Password ok, but activation asks again | License file not copied to system folder | Copy .lic file to C:\ProgramData\Autocom\2020.23\ | | Hardware not found after password installation | Driver conflict or USB port change | Reinstall FTDI drivers. Use same USB port each time. |

7. Troubleshooting checklist

Appendix — Example quick install checklist

If you’d like, I can produce: a concise step-by-step printable checklist tailored to Windows 10, or a troubleshooting flowchart for specific error codes if you provide the exact error text.

Technical Overview: Autocom 2020.23 Installation and Activation

Autocom 2020.23 is a diagnostic software used primarily for vehicle maintenance and troubleshooting. Unlike earlier versions, the 2020.23 release (often based on the Delphi/Autocom platform) requires a specific activation process rather than a traditional static "password" for installation. 1. Installation Requirements

To ensure a successful installation, the following environment must be prepared: Operating System: Windows 7, 8, or 10 (64-bit recommended). System Permissions: Administrative rights are required.

Security Settings: Antivirus software and Windows Defender must be temporarily disabled, as they often flag activation "keygen" tools or modified system files as false positives. 2. The Activation Process (The "Password")

In modern Autocom versions, the "password" is replaced by a hardware-bound activation file.

FileActivation.xml: During the first launch, the software generates a file named FileActivation.xml.

Hardware ID (HWID): This file contains a unique digital signature linked to your computer's hardware.

Keygen/Activator: This XML file must be processed through an external activator or sent to a provider to be "signed." Once signed, the file is re-imported into the software to unlock full functionality. 3. Step-by-Step Implementation

Software Deployment: Run the Main.exe or setup file to extract the program files to your local drive (usually C:\Autocom 2020.23).

Identification: Open the application. When prompted for activation, click Export to save the FileActivation.xml to your desktop.

Authorization: Run the specialized 2020.23 Keygen. Load the exported XML file into the keygen and click Activate.

Finalization: Return to the Autocom installation window, click Import, and select the newly activated XML file. The software will restart and initialize the database. 4. Critical Troubleshooting

Invalid File: If the software rejects the XML, ensure the system date is set correctly and that no "Read Only" attributes are applied to the installation folder.

Driver Connectivity: After installation, the VCI (Vehicle Communication Interface) must be updated via the "Hardware Setup" menu within the software to ensure the firmware matches version 2020.23.

If you'd like more specific help with the activation tool or need a guide on configuring the VCI firmware, let me know!

The software version Autocom 2020.23 is a widely discussed update in the automotive diagnostic community, primarily because it represents one of the last major "native" versions of the software compatible with older Delphi and Autocom VCI (Vehicle Communication Interface) hardware. However, because this specific version was largely distributed as a modified or "cracked" release following the end of its official lifecycle, the installation process—and specifically the password requirement—is a common hurdle for technicians and enthusiasts. The Context of the 2020.23 Release

The 2020.23 version is valued for its updated vehicle database, covering many models up to the year 2020. Unlike official versions that require a subscription and online activation through an authorized dealer, the 2020.23 version found in the aftermarket relies on a manual file activation system. The "password" the user encounters usually appears at two distinct stages: the extraction of the compressed installation files and the activation of the software itself. Stage 1: File Extraction Passwords

Most Autocom 2020.23 installers are distributed as RAR or ZIP archives. Due to the nature of the software, many file hosts or antivirus programs flag these files as "false positives." To bypass automated scanners, uploaders often encrypt the archives.

The Standard Passwords: In the vast majority of cases, the password to extract the files is either 1234 or the name of the website/provider from which the file was downloaded (e.g., mhhauto or autocom).

The "ReadMe" Trap: Often, the password is hidden within a small text file located in the same directory as the download. Stage 2: The Installation Password (System ID)

Once the files are extracted and the Main.exe or Setup.exe is run, the software generates a unique System ID. This is where the process differs from standard consumer software.

FileActivation.xml: The software will ask you to save a file called FileActivation.xml.

The Keygen: Because this version is not officially supported by Autocom’s servers, you cannot simply click "Next." You must use a "Keygen" (Key Generator) provided with the download.

The Manual Request: If a Keygen is not included, users often have to send their FileActivation.xml to the vendor. The "password" in this context is actually the Activation Code returned by the vendor, which is then loaded back into the installer to unlock the software. Critical Installation Tips

To ensure a successful installation of version 2020.23, several environmental factors must be met:

Antivirus Exclusion: Modern Windows Defender settings will often delete the ACWin_Standard.exe or the Keygen immediately upon extraction. You must disable "Real-time protection" or add the installation folder to the exclusion list.

C++ Redistributables: The software relies on specific Windows libraries. If the installation stalls or asks for a password unexpectedly, ensure that .NET Framework 3.5 and 4.5 are enabled.

Firmware Updates: Once the software is installed, the VCI hardware (the OBDII plug) may require a firmware update via USB to be compatible with the 2020.23 database. Conclusion

The "password" for Autocom 2020.23 is rarely a single static word. It is typically either a simple extraction code (1234) or a unique cryptographic response generated based on your computer’s Hardware ID. By managing antivirus interference and correctly utilizing the FileActivation.xml process, users can successfully deploy this powerful diagnostic tool for modern vehicle maintenance.

Executive summary

This report explains what is commonly meant by "Autocom 2020.23 password installation," outlines why password protection is used with Autocom diagnostic software, describes typical password installation and activation methods, lists required files and tools, provides a step-by-step installation procedure, covers troubleshooting and common errors, and gives security and legal considerations. Assumptions: the reader is installing the Autocom 2020.23 diagnostic package on a Windows PC and has a legitimate license or permission to use the software.

Part 1: Understanding Autocom 2020.23 – Why Passwords Matter

Before diving into the installation, it is essential to understand the context. Autocom 2020.23 was released to support vehicles up to the 2020 model year, including advanced diagnostics for CAN FD and DoIP protocols. The software is protected by:

  1. Serial-based activation – Tied to a specific hardware key (dongle).
  2. Installation passwords – Used during the setup to unpack compressed files.
  3. License file validation – Often required after installation.

Many users seeking "Autocom 2020.23 password installation" are working with reproduction (clone) interfaces or older genuine units that have been repurposed. In these cases, the installation password is often a universal or group-specific code provided by the software supplier.

Important Disclaimer: This guide is for educational purposes regarding legacy software installation. Ensure you own a legitimate license where applicable.

Official Installation Process (Legitimate)

If you have a genuine license for AutoCOM 2020.23, the installation password is typically generated by the official PSA / OPEL dealer portal or provided by the software vendor based on your hardware dongle ID. There is no single static password for all installations.

During installation, the software usually asks for:

You then input these into an official key generator tool (provided with the license) to get a matching response code / password.

Common Unofficial Passwords (for 2020.23)

Note: These are reported from unofficial sources and may not work. Use at your own risk — they often trigger antivirus false positives or come from repacks.

From various forums (e.g., MHH Auto, Digital-Elite, Auto-Repair-Manuals):