Bootloader Hekateiplini Has Boot Entries Hot

The error "No main boot entries found" in Hekate typically means the hekate_ipl.ini

file is missing, incorrectly named, or empty. By default, Hekate does not include any boot options; you must create them manually or download a template. 1. Correct File Placement and Naming : The file must be located exactly at /bootloader/hekate_ipl.ini on the root of your SD card. Common Mistake : Ensure the file is not accidentally named hekate_ipl.ini.txt

. In Windows, enable "File name extensions" in File Explorer to verify the extension is strictly Folder Error hekate_ipl.ini is a file, not a folder containing a text document. 2. Recommended Configuration Template

You can copy and paste the following standard configuration into your hekate_ipl.ini

file. This setup includes entries for Atmosphere CFW on both emuMMC and sysMMC, as well as a clean Stock boot option. bootloader hekateiplini has boot entries hot

[Corruption] How to fix the bootloader folder without formatting #614

Step 2: Clean the Configuration

Insert the SD card into a PC. Open bootloader/hekate_ipl.ini. Remove all entries except a single, known-good launch:

[Atmosphere FSS0]
emummcforce=1
fss0=atmosphere/package3
kip1=atmosphere/kips/*
icon=bootloader/res/icon_payload.bmp
{}

Save as UTF-8 without BOM.

Part 3: The Most Common Culprit – A Corrupt hekate_ipl.ini

The primary cause of the “boot entries hot” warning is a malformed configuration file. IPlini is exceptionally sensitive to syntax errors. The error "No main boot entries found" in

Example of a “Hot” Bad Entry:

[Boot Entry 1]
payload=bootloader/payload.bin
logopath=bootloader/bootlogo.bmp
; Missing "warmboot=" or extra spaces cause IPlini to crash-loop

How to Diagnose:

  1. Boot Hekate -> Payloads -> IPlini.bin.
  2. If the screen flashes black and returns to Hekate, your IPlini config is the source of the heat.
  3. Check sd:/bootloader/hekate_ipl.ini for:
    • Duplicate [entry] names.
    • Missing warmboot=Power or warmboot=Reboot directives.
    • Incorrect file paths (case-sensitive! Payload.bin ≠ payload.bin).

Part 6: Preventing Future “Hot” Boot Entries

To avoid heating up your bootloader again, adhere to these rules:

  1. Never chain IPlini from IPlini. That creates an infinite recursion that overheats the CPU within seconds.
  2. Keep your Hekate and IPlini versions in sync. A mismatch (e.g., Hekate 6.0.2 with IPlini 5.5.0) causes silent boot entry corruption.
  3. Use fss0 over payload whenever possible. fss0 boots Atmosphere directly without invoking IPlini, reducing thermal load.
  4. Monitor temperatures in Hekate. Press (Vol +) + (Vol -) on the main screen to display the PMIC temperature. Anything above 55°C at idle indicates a boot entry is still “hot.”

Fix #3: Update Hekate (Critical!)

If you are using a version older than 5.5.0, you are missing power management patches. Step 2: Clean the Configuration Insert the SD

  • Old bug: Hekate kept the high-performance cores (A57s) unlocked on the menu.
  • New fix: Current versions (6.x) drop the CPU to the lowest P-state when idle.

Action: Download the latest hekate_ctcaer_x.x.x.bin from GitHub and replace the file on your SD card.

Part 6: The Future of "Hot" Booting

The reason this keyword is gaining traction is the shift toward Dual Boot setups (Switch + Linux + Android). As Hekate evolves to support UMS (USB Mass Storage) and SD partitioning on the fly, the bootloader must keep every entry "hot" to allow instant switching between operating systems.

The upcoming Hekate 7.0 is rumored to introduce "Hot Swap," where you can modify hekate_ipl.ini via a USB cable while the console is in Hekate, and the menu will refresh instantly—no reboot required. This is the ultimate "hot boot entry" feature.

Important Notes

  • Safety: Hot booting is convenient but can make it harder to enter Hekate’s menu (hold Vol Down during boot to override).
  • Payload path: Ensure the payload file (e.g., fusee.bin) exists in the specified folder.
  • Reboot-to-payload: Some entries use payload=reboot_payload.bin for chainloading; this is not a hot boot per se but can be paired with auto-boot.