Code Soft Tp-3160s Driver -

This guide covers the installation and configuration of the driver for the CODE SOFT TP-3160S

receipt printer, specifically within the CODESOFT label design software. 1. Identify the Driver Type When setting up the in CODESOFT, you have three driver options:

Native Printer Driver: These are thermal drivers built directly into CODESOFT by TEKLYNX. They provide a "What You See Is What You Get" (WYSIWYG) experience and access to advanced features specific to the software.

Windows Printer Driver: This refers to standard Windows drivers installed through the OS. If you installed a driver from a disk or the manufacturer’s site before opening CODESOFT, it will appear here.

Current Printer: Simply selects your computer's default printer. 2. Install the Native Driver

Using native drivers is recommended for thermal transfer and direct thermal printers like the Open CODESOFT and go to File > Printer (or press F5). Click the Add or Add Printer button. In the manufacturer list, find and expand CODE SOFT. Select the model.

Choose the connection Port (e.g., USB001, COM1, or a TCP/IP address).

Click OK. A small printer icon will now indicate the printer is using the internal native driver. 3. Update with Driver Service Pack (DSP)

is not in your list, you may need a TEKLYNX Driver Service Pack. code soft tp-3160s driver

Download: Visit the TEKLYNX Driver Center and search for the CODE SOFT brand.

Install: Close CODESOFT, right-click the downloaded file, and select Run as administrator. Follow the prompts to add the new model to your library. 4. Basic Troubleshooting

Self-Test: To check if the printer hardware is working, hold the FEED button and turn on the power. Release the button after 1 second. The printer should print its firmware version and connection type.

Connection Test: In the CODESOFT printer settings, use the "Test Connection" button (if available for your port type) to verify the workstation can communicate with the hardware.

Admin Rights: Ensure you run CODESOFT as an administrator if you need to create new network ports or UNC paths.

For further hardware specifications or manual downloads, you can visit the Official CODE SOFT Website. TEKLYNX printer drivers for CODESOFT label design software

Code Soft TP-3160S is a professional-grade thermal receipt printer designed for high-efficiency retail and hospitality environments. To ensure seamless operation, installing the correct driver is essential for communication between the hardware and your operating system or label design software. Driver Acquisition and Installation Drivers for the

are typically provided by the manufacturer or authorized software partners like This guide covers the installation and configuration of

. For those using specialized labeling software, downloading the latest Driver Service Pack (DSP)

is recommended to ensure "What You See Is What You Get" (WYSIWYG) accuracy. Official Downloads : You can find the specific TP-31xx Series

driver files (available in both x86 and x64 versions) on the Code Soft Product Page Installation Steps Locate the downloaded file, typically found in your Right-click the installation file and select Run as administrator to ensure full permission for port configuration.

Follow the prompts to select your printer model and the corresponding port (e.g., USB, COM, or TCP/IP). software, navigate to File > Select Printer to add the native driver. Key Specifications of the

is known for its reliability and high-speed output. Below are the primary technical details: Specification Printing Method Line Thermal Printing Print Speed Up to 160mm/sec (approx. 42 lines/sec) Paper Width Interfaces USB, Serial (RS232), and Parallel Compatibility ESC/POS Command Sets Reliability 100km TPH (Thermal Printer Head) life Advanced Features Auto Cutter

: Features a built-in auto cutter that supports both full and partial cuts. Cash Drawer Support

: Includes a built-in interface (RJ11) to control one cash drawer, with configurable open/close timing in the driver settings. Multi-OS Support

: The drivers are compatible with various Windows versions, including Windows 7, 8, 10, and 11. How to Add a Printer Driver in CODESOFT In Printing Preferences > Advanced Options , change

Error 3: Paper out error even when paper is loaded

Cause: The driver’s “Media Sensor” type is wrong. Fix:

• In Printing Preferences > Advanced Options, change Sensor Type from Gap to Black Mark (or vice versa).
• Run a Media Calibration from the printer's front panel: Power off > Hold Feed + Power > Release when LED flashes once.

Method 1: Plug and Play (Windows Update)

1. Connect the TP-3160S via USB to your PC and power it on.
2. Windows may attempt to auto-install a driver. Cancel this. Generic drivers rarely work.
3. Go to Settings > Devices > Printers & Scanners.
4. Click “Add a printer or scanner” and wait for it to find the device. If it appears as “Unknown Device,” proceed to Method 2.

Part 6: Optimizing Driver Settings for Different Media

The same driver behaves differently depending on your label stock. Use this cheat sheet.

| Media Type | Driver Setting | Darkness | Print Speed | Gap/Black Mark | | :--- | :--- | :--- | :--- | :--- | | Paper Labels (Glossy) | Thermal Transfer | 18-22 | 3 IPS | Gap | | Synthetic/Polypropylene | Thermal Transfer | 24-28 | 2 IPS | Gap | | Direct Thermal (Shipping) | Direct Thermal | 12-14 | 4 IPS | Gap | | Continuous Roll (No gaps) | Continuous | 15 | 4 IPS | Black Mark | | Heat Shrink Tubing | Thermal Transfer | 26 (Max) | 1 IPS | Black Mark |

How to save these settings: In Printer Properties > Advanced, click Printing Defaults. Create a New Profile (e.g., "Poly Labels High Dark") so you don't have to re-enter settings per job.

5. Status Monitoring & SNMP

This is a "deep" feature often ignored by casual users but critical for IT administrators.

• Bi-Directional Communication: The driver doesn't just send data; it listens. It reports real-time status back to the PC (Head Open, Paper Out, Ribbon Out, Pause).
• SNMP (Simple Network Management Protocol): If connected via Ethernet/Wi-Fi, the driver/interface supports SNMP traps. This allows a central server to ping the printer and get a response like "Toner Low" or "Media Jam" without walking to the physical location.

To get the correct driver, please check:

1. Look for a brand name on the device – e.g.,

   • TSC
   • Godex
   • Zebra
   • Citizen
   • POSTECH / POSBank

2. Check the label underneath – there should be a manufacturer + exact model (e.g., TSC TP-3160S is not standard; maybe you misread TSC TTP-345 or TDP-225).

3. Most common driver sets that might work (if it's a thermal label printer):

   • TSC Printer Driver (official from TSC)
   • Seagull Scientific Drivers (Bartender)
   • Generic Windows POS driver (OPOS / Microsoft POS for .NET)