Easy Print | Es-9930u Driver

For the Easy Print ES-9930U (often a thermal receipt or label printer found in POS systems), you typically do not need a separate driver if you are using Windows 8, 10, or 11.

Here is the correct setup method:

Phase 2: Automatic Detection

Windows should detect new hardware and finalize the installation. If it does not: easy print es-9930u driver

1. Open Control Panel > Devices and Printers.
2. Click Add a printer.
3. Select "The printer that I want isn't listed."
4. Choose "Add a local printer".
5. Create a new port: Standard TCP/IP Port (for network) or USB001 (for USB).
6. In the driver list, click Have Disk and browse to the folder where you extracted the driver.
7. Select the .inf file and complete the wizard.

What the driver is and why it matters

• Purpose: translates standard Windows print calls and label-design application output into the printer’s command set (printer mode, cut/tear, label length, thermal settings, counters, graphics, barcodes, RFID where supported).
• Scope: supports multiple EasyPrint models, including compact/IM/TM/TM350–580 families; the ES-9930U is typically supported via the multi-model EasyPrint driver package rather than a model‑exclusive driver.
• Benefits: reliable label formatting, hardware counters, printer status reporting, Windows spooler integration, and compatibility with labeling software (NiceLabel/BarTender/Crystal Reports).

For Cloud POS (Loyverse, Square, Shopify POS)

• These systems often require a network printer or a print server.
• Connect the ES-9930U via Ethernet or use a USB-to-Ethernet adapter.
• The driver must be shared on a local server if using USB direct.

Paper Size

• Go to Printer Preferences > Advanced.
• Set Paper Size to 80 x 297 mm (or custom receipt length).
• Check "Continuous roll" if your receipts are cut after each print.