Firmware Asus Zenfone Max Pro M1 Android 10 [verified] | Top - 2026 |

Asus did not release an official Android 10 update for the Zenfone Max Pro M1 (ZB601KL / ZB602KL). The last official firmware from Asus is Android 9 Pie.

If you are looking for an Android 10 ROM for this device, you need to use custom firmware (unofficial). The most stable and widely used options are:

LineageOS 17.1 (Unofficial builds exist for X00T/D)
Pixel Experience (Android 10) – AOSP-based with Pixel features
Havoc OS – Feature-rich
crDroid

Important notes:

Installing any Android 10 custom ROM requires an unlocked bootloader and a custom recovery (like TWRP).
Your device’s firmware (baseband/vendor) should typically be updated to the latest Asus Android 9 (Pie) version before flashing Android 10 custom ROMs.
Asus’s official firmware download page for this model only provides Android 8.1 and 9.0.

Where to find these:

XDA Developers Forums – “Asus ZenFone Max Pro M1” section
Search for “X00T Android 10” or “ZB602KL Android 10 custom ROM”

If you actually need the latest official Asus firmware (Android 9), you can get it from:

Asus Support website → ZenFone Max Pro M1 → Drivers & Tools → BIOS & Firmware

🛠️ ASUS ZenFone Max Pro M1 (ZB601KL/ZB602KL) Android 10 Guide

The transition to Android 10 for the ZenFone Max Pro M1 is unique because it never moved past "Beta" status for the official global firmware. While stable, it requires manual installation. 📥 Official Firmware Details Version: Android 10 Developer Version (Final) Build Number: V17.2017.2012.438 Release Date: Q4 2020

Key Features: System-wide Dark Mode, Gesture Navigation, Improved Privacy Controls. ⚠️ Pre-Installation Checklist Backup Data: This process wipes all user data. Battery: Ensure at least 60% charge. Model Check: Verify your model is ZB601KL or ZB602KL. Storage: At least 2GB free on internal storage. 🚀 How to Install (Official Manual Method)

Download: Get the ZIP firmware from the official ASUS Support site.

Placement: Move the ZIP file to the root directory of your internal storage (not inside any folder). Trigger: Restart your phone.

Update: A notification saying "System Update File Detected" will appear. Tap it.

Wait: The phone will reboot and begin the installation. Do not turn off the device. 📉 Known Issues in Android 10 Beta

Since this build is a "Developer Version," some users report:

Slow Charging: Charging speeds may feel lower than Android 9.

EIS Issues: Electronic Image Stabilization might be buggy in the stock camera. Audio: Occasional low volume in wired headphones. 🔓 The Custom ROM Alternative

Because official support ended at Android 10, many users opt for Custom ROMs to get Android 11, 12, or 13. Popular Options: Pixel Experience, LineageOS, ArrowOS.

Requirement: Requires unlocking the bootloader and installing TWRP recovery.

The ASUS ZenFone Max Pro M1 is a popular budget smartphone that was released in 2018. It came with Android 8.1 Oreo out of the box, but ASUS has been providing regular software updates to the device. In 2020, the company started rolling out the Android 10 update for the ZenFone Max Pro M1.

Update Details:

The Android 10 update for the ASUS ZenFone Max Pro M1 was released in January 2020. The update brought a host of new features, including a new user interface, improved performance, and enhanced security.

Key Features of Android 10 Update:

New User Interface: The Android 10 update brought a new user interface to the ZenFone Max Pro M1, which includes a new design language and improved typography.
Dark Mode: The update also introduced a system-wide dark mode, which can help reduce eye strain and improve battery life.
Improved Performance: The Android 10 update improved the overall performance of the device, including faster app launching and switching.
Enhanced Security: The update also brought improved security features, including a new permission system and improved biometric authentication.
Gesture Navigation: The update introduced a new gesture-based navigation system, which allows users to navigate the device using gestures instead of traditional buttons.

Firmware Details:

The firmware version for the Android 10 update on the ASUS ZenFone Max Pro M1 is: firmware asus zenfone max pro m1 android 10

Firmware Version: 16.2017.1905.413
Android Version: 10
Security Patch Level: January 2020

Installation:

The Android 10 update for the ASUS ZenFone Max Pro M1 was rolled out over-the-air (OTA), which means that users can download and install the update directly on their device. To check for the update, users can go to the device's settings menu, then select "Software Update" or "System Update."

Changelog:

The changelog for the Android 10 update on the ASUS ZenFone Max Pro M1 includes:

System
- Updated to Android 10
- New user interface
- Improved performance
- Enhanced security
Apps
- Updated to latest versions
Security
- January 2020 security patch level

Known Issues:

Some users have reported issues with the Android 10 update on the ASUS ZenFone Max Pro M1, including:

Wi-Fi connectivity issues: Some users have reported issues with Wi-Fi connectivity after updating to Android 10.
Bluetooth connectivity issues: Some users have reported issues with Bluetooth connectivity after updating to Android 10.

Downgrade:

If users encounter issues with the Android 10 update, they can downgrade to the previous Android version (Android 9.0 Pie) using a firmware downgrade tool provided by ASUS.

Conclusion:

The Android 10 update for the ASUS ZenFone Max Pro M1 brings a host of new features and improvements to the device. While some users have reported issues with the update, ASUS has been actively providing support and fixes to address these issues. Overall, the Android 10 update is a significant improvement for the ZenFone Max Pro M1, and users are recommended to install it to take advantage of the latest features and security patches.

The official Android 10 update for the Asus ZenFone Max Pro M1 (ZB601KL/ZB602KL)

was primarily released as a Developer Beta rather than a standard automatic Over-The-Air (OTA) update. While some later builds like WW-17.2018.2012.438 (released around December 2020) were considered stable by users, they still typically required manual installation. Official Firmware Details Latest Major Version: Android 10. Final Stable/Beta Build: WW-17.2018.2012.438. File Size: Approximately 1.6 GB to 1.7 GB.

Key Features: System-wide dark mode, full-screen navigation gestures, and improved app permission controls. Official Downloads: Available via the ASUS Support Center. Manual Installation Steps To update your device to Android 10, follow these steps:

Title: Asus Zenfone Max Pro M1 Android 10 Firmware Update: Here's What You Need to Know

Introduction:

Asus has been a popular choice among Android enthusiasts, and the Zenfone Max Pro M1 is one of the most successful devices from the company. Launched in 2018, the Zenfone Max Pro M1 has been a favorite among users due to its powerful performance, long-lasting battery life, and affordable price tag. Now, after months of anticipation, Asus has finally started rolling out the Android 10 firmware update for the Zenfone Max Pro M1. In this post, we'll guide you through the details of the update, what's new, and how to install it on your device.

What's New in Android 10 for Zenfone Max Pro M1:

The Android 10 update for Zenfone Max Pro M1 brings a host of new features and improvements, including:

Dark Mode: A system-wide dark mode that changes the look and feel of the device, making it easier on the eyes in low-light conditions.
Gesture Navigation: A new gesture-based navigation system that replaces traditional navigation buttons.
Smart Lock: A feature that uses machine learning to predict when you'll unlock your device and prepare it for you.
Improved Performance: Android 10 brings several performance improvements, including faster app launching and better memory management.
Security Patches: The update includes the latest security patches to keep your device safe from vulnerabilities.

Update Details:

Build Number: 16.2017.1905.413
Android Version: 10 (Q)
File Size: [Insert file size]
Update Type: OTA (Over-the-Air)

How to Install the Android 10 Update on Zenfone Max Pro M1:

To install the Android 10 update on your Zenfone Max Pro M1, follow these steps:

Check for Updates: Go to Settings > System > Software Update.
Download and Install: If the update is available, download and install it. Make sure you have a stable internet connection and sufficient battery life (at least 50%).
Wait for the Update to Complete: The update process may take a few minutes to complete. Your device will restart several times during the process.

Manual Update (Optional):

If you can't wait for the OTA update to arrive on your device, you can manually flash the firmware using the Asus Firmware Restoration Tool. Here's how:

Download the Firmware: Download the Android 10 firmware file for Zenfone Max Pro M1 from the official Asus website.
Enable Developer Options: Go to Settings > About Phone > Build Number and tap on it 7 times to enable Developer Options.
Enable USB Debugging: Go to Settings > Developer Options > USB Debugging and enable it.
Connect to PC: Connect your device to a PC using a USB cable.
Flash the Firmware: Use the Asus Firmware Restoration Tool to flash the firmware file.

Conclusion:

The Android 10 update for Zenfone Max Pro M1 brings a host of new features and improvements to the device. If you're a Zenfone Max Pro M1 user, you can expect to receive the OTA update soon. Alternatively, you can manually flash the firmware using the Asus Firmware Restoration Tool. We hope this guide helps you to update your device to Android 10. If you have any questions or issues, feel free to comment below.

Disclaimer: Updating your device to a new firmware version may void your warranty and may potentially brick your device. Proceed with caution and at your own risk.

The story of the Asus ZenFone Max Pro M1 and its journey to Android 10 is a legendary tale within the tech community—one of high hopes, long waits, and a "final" update that many users still discuss today. The Promise of Two Updates

When the ZenFone Max Pro M1 launched in 2018, it was a budget powerhouse. Asus promised users two major OS upgrades: first to Android 9 (Pie), and then to Android Q (Android 10). While the Pie update arrived relatively on time, the road to Android 10 became a multi-year saga. The Beta Wilderness

In early 2020, the first official Android 10 Beta (version 407) was released. For many, it was a dream come true, bringing features like: System-wide Dark Mode New Gesture Navigation Improved Digital Wellbeing

However, this "dream" came with a cost. Users reported a flood of bugs, including:

For the ASUS ZenFone Max Pro M1 (ZB601KL/ZB602KL), Android 10 is available primarily as an official beta firmware. While some community reports mentioned a "stable" release, the final official versions provided by ASUS remained in the beta channel. Official Firmware Details The latest available Android 10 builds for this device are: Version 438 (Beta 5): WW-17.2017.2012.438. Version 429 (Beta 3): WW-17.2017.2006.429. Initial Beta: WW-17.2017.1911.407 (~1.6 GB). Key Android 10 Features System-wide Dark Mode for improved battery and eye comfort. Full-screen Navigation Gestures.

Enhanced Privacy: More granular control over app permissions.

Digital Wellbeing: Includes "Focus Mode" and parental controls.

Specific Fixes: Improvements to VOIP call silence, NFC functionality, and HDR settings in games like PUBG. How to Install (Manual Update)

Because these are beta builds, they are not typically pushed via Over-the-Air (OTA) and must be installed manually.

Backup Data: Manual updates to beta versions will wipe your internal storage.

Verify Version: Ensure you are on the latest official Android 9 (Pie) build before proceeding.

Download Firmware: Get the official ZIP file from the ASUS Support Page.

Placement: Move the downloaded file to the root directory of your phone's internal storage (not in any folder).

Trigger Update: Restart your phone. A "System Update File Detected" notification should appear in the status bar. Tap it to start the process. Important Considerations

Bugs: As beta software, users have reported issues such as camera errors (ID=0) and occasional system stutters.

SKU Matching: Always download the firmware that matches your device's SKU (e.g., WW to WW, JP to JP) to avoid update failure.

Custom ROMs: For users wanting a more stable or updated experience, many third-party options like LineageOS or AOSP-based ROMs exist on community forums like XDA. ZenFone Max Pro (ZB602KL) - Support - ASUS

Upgrading to Android 10: A Guide to Firmware for ASUS ZenFone Max Pro M1 Asus did not release an official Android 10

The ASUS ZenFone Max Pro M1, a popular budget smartphone, has been a favorite among Android enthusiasts since its release in 2018. With its powerful battery, impressive camera, and affordable price tag, it's no wonder that many users have fallen in love with this device. However, as with any smartphone, software updates are essential to ensure that the device stays secure, efficient, and feature-rich. In this article, we'll explore the world of firmware for the ASUS ZenFone Max Pro M1, specifically focusing on the highly anticipated Android 10 update.

Why Android 10 for ZenFone Max Pro M1?

Android 10, released in September 2019, brings a plethora of exciting features to the table. Some of the most notable improvements include:

Dark Mode: A system-wide dark theme that reduces eye strain and conserves battery life.
Gesture Navigation: A more intuitive and gesture-based navigation system that replaces traditional buttons.
Smart Lock: A feature that uses machine learning to predict when to lock the device, improving battery life.
Improved Performance: Android 10 is optimized for better performance, making it a great update for devices like the ZenFone Max Pro M1.

Firmware Development for ZenFone Max Pro M1

ASUS has been actively working on updating its devices to Android 10, and the ZenFone Max Pro M1 is no exception. The company has released several beta and stable builds of Android 10 for the device, which have been well-received by the community.

Available Firmware Versions

Several firmware versions are available for the ASUS ZenFone Max Pro M1, including:

WW-16.2017.1905.1: An early Android 10 beta build, which introduced the new operating system to the device.
WW-16.2017.1906.1: A subsequent beta build that addressed several issues and improved performance.
WW-32.177.2019.1: A stable Android 10 build, which has been widely adopted by users.

How to Update to Android 10

Updating to Android 10 on the ZenFone Max Pro M1 is a relatively straightforward process. Here are the steps:

Check for Updates: Go to Settings > System > Software Update and check for available updates.
Download and Install: If an update is available, download and install it. Make sure you're connected to a stable internet connection.
Follow On-Screen Instructions: Follow the on-screen instructions to complete the update process.

Manual Firmware Installation

For users who want more control over the update process or are experiencing issues with the automatic update, manual firmware installation is an option. Here's how:

Download the Firmware: Download the desired firmware version from the ASUS website or a trusted source.
Enable Developer Options: Go to Settings > About Phone and tap the Build Number seven times to enable Developer Options.
Enable USB Debugging: Go to Settings > Developer Options and enable USB Debugging.
Connect to PC: Connect the device to a PC using a USB cable.
Use a Firmware Installation Tool: Use a tool like ASUS Flash Tool or SP Flash Tool to install the firmware.

Important Considerations

Before updating to Android 10, consider the following:

Backup Your Data: Make sure to backup your important data, as the update process may wipe the device.
Charge Your Device: Ensure the device is fully charged or connected to a power source during the update process.
Be Aware of Bugs: As with any software update, there may be bugs or issues. Be prepared to report them to ASUS or seek support from the community.

Conclusion

The Android 10 update for the ASUS ZenFone Max Pro M1 brings a wealth of new features and improvements to the device. While the update process can seem daunting, it's essential to stay up-to-date with the latest software to ensure the device stays secure and efficient. With this guide, users can confidently update their device to Android 10 and enjoy the latest features and enhancements.

Frequently Asked Questions

Q: When will my device receive the Android 10 update? A: The update rollout schedule may vary depending on your region and device variant. Check for updates regularly or wait for an official announcement from ASUS.
Q: Can I downgrade to Android 9 (Pie) if I encounter issues with Android 10? A: Yes, but be aware that downgrading may void your warranty and potentially cause issues with your device.
Q: Will I lose my data during the update process? A: It's recommended to backup your data before updating, as the update process may wipe the device.

Additional Resources

For more information on the ASUS ZenFone Max Pro M1 and Android 10 update, check out the following resources:

ASUS Official Website: The official ASUS website provides the latest information on firmware updates, user manuals, and support resources.
XDA Developers Forum: A community-driven forum where users can discuss and share information about the ZenFone Max Pro M1 and Android 10 update.
ASUS ZenFone Max Pro M1 User Manual: A comprehensive guide to the device, covering its features and settings.

Common installation methods

Official OTA: Delivered via Settings > System > System update; easiest and safest.
Stock recovery update: Place official ZIP on internal storage and apply from stock recovery (if provided by Asus).
ADB sideload (stock recovery): Use adb sideload <package.zip> to apply update.
Fastboot / Flash Tool: For full firmware flashing (may require unsinged images unlocking bootloader). Use Asus recommended tools or generic fastboot commands:
- Example fastboot steps (simplified):
  1. Reboot to bootloader: adb reboot bootloader
  2. Use fastboot to flash partitions: fastboot flash boot boot.img, fastboot flash system system.img, etc.
- WARNING: Incorrect flashing can brick the device.

Mandatory:

Unlocked Bootloader (official unlock tool from Asus)
Custom Recovery (TWRP 3.3.1+ or OrangeFox)
Android 10 Custom ROM (ZIP file)
Android 10 compatible kernel (usually included in ROM)
Firmware+vendor (some ROMs require Pie firmware as base)

Official Asus Firmware (Android 10? – No)

Let’s clear a major misconception: Asus never released an official Android 10 firmware for the ZenFone Max Pro M1. The last official build (WW-16.2017.2004.063) is Android 9 Pie, with a security patch from early 2020. If you see a website claiming “Stock Asus Android 10 ROM” for X00TD, it is fake or malware.

Problem 1: Bootloop after flashing

Solution: Reboot to TWRP, wipe Data and Cache, re-flash ROM. Ensure you flashed the correct firmware for X00TD (not Pro M2).

Preparations before flashing

Backup all data (internal storage, app data). Flashing full firmware or performing factory reset will erase user data.
Charge battery to >50%.
Install necessary drivers on PC (ADB & Fastboot drivers, and Asus USB drivers).
Download correct firmware package and verify file integrity (checksum if provided).
Read official release notes and any device-specific flashing instructions.

🧹 Step 2 – Wipe & Format

In TWRP:

Tap Wipe → Advanced Wipe → select:
- Dalvik / ART Cache
- System
- Data
- Cache
Go back → Format Data → type yes

⚠️ This removes encryption and prepares for Android 10.