Device: Fnirsi 1014D Task: Firmware Update Success: Yes
Review:
I recently had the opportunity to update the firmware of my Fnirsi 1014D device, and I must say that the process was relatively smooth and straightforward.
Preparation:
Before starting the update process, I made sure to:
Update Process:
The update process itself was quite simple:
Outcome:
After the update was complete, I restarted the device and verified that the new firmware version was successfully installed. The device was functioning as expected, with no issues or errors.
Pros:
Cons:
Conclusion:
Overall, I was pleased with the firmware update process for my Fnirsi 1014D device. The process was easy to follow, and the new firmware version was successfully installed without any issues. I would give this process a rating of 5/5 stars.
Recommendations:
By following these simple steps, users should be able to successfully update the firmware of their Fnirsi 1014D device. fnirsi1014d firmware update work
Updating the firmware of a FNIRSI 1014D oscilloscope is a critical procedure used to resolve issues like voltage level deviation, waveform instability, or UI glitches
. The latest official release identified in user communities is Version 3.0 (dated October 2021). Core Update Requirements Firmware File: The device specifically looks for a file named FSI-1014.bin Hardware Interface:
A standard USB data cable is required. Note that some users describe this as an "A to A" cable. Target Drive:
The firmware is written to an internal 8GB micro SD card that serves as the device's storage. Step-by-Step Installation Process Visit the official FNIRSI Support Page to download the latest file. Some users report that Mozilla Firefox
may be necessary for the download link to function correctly. Enter Export Mode: Power on the oscilloscope, press the button, and select USB export PC Connection:
Connect the device to your PC. A new removable drive (approx. 8GB) should appear. Transfer File: Delete any existing files on the drive. FSI-1014.bin file directly to the root of the drive. Finalize Update: Properly eject the drive from your operating system. Disconnect the USB cable and power the oscilloscope
A progress bar should appear; the process typically completes in under 20 seconds. Common Issues and Troubleshooting Cause / Solution Screen Shifted Left Device: Fnirsi 1014D Task: Firmware Update Success: Yes
Indicates an incorrect firmware file was used; contact support for the correct version. White Screen
Often indicates physical damage to the display or internal ribbon cable rather than a firmware issue. Drive Not Appearing
Ensure the cable is a data cable, not just a charging cable. Try a different USB port. File Not Disappearing
After a successful update, the device should automatically delete the file from its storage. Advanced and Open Source Alternatives For users seeking more than the stock experience, the GitHub - FNIRSI_1014D_Firmware
repository contains open-source reverse-engineered firmware. This community version includes a boot loader
that allows users to select between different firmware versions at startup. custom firmware
The FNIRSI-1014D is a beloved but quirky piece of hardware—a dual-channel oscilloscope known for its responsive touchscreen and high refresh rate, but infamous for its questionable measurement accuracy out of the box. For electronics enthusiasts, it is the ultimate "fixer-upper." Download the latest firmware version from the manufacturer's
This is the story of one engineer’s quest to unlock the machine's true potential through a firmware update.