To reset the password for a Hi Sharp DVR, you can use the built-in "Forget Password" feature or contact their technical support with specific device information. Password Reset Methods Dynamic Code Method: Navigate to the login screen on your DVR monitor. Click on Forget Password and then Retrieve Password. Select the Dynamic Code page.
Take a photo or screenshot of this page and send it to your regional distributor or seller.
Alternatively, email the screenshot along with your region, model number, and serial number to the Hi Sharp Support Team.
Default Credentials: If the device has been factory reset or is being set up for the first time, try the following common default settings: Username: admin Password: 123456
Physical Factory Reset: For some H.264 based DVR models, removing the CMOS battery (the coin-sized battery on the motherboard) for 5–10 minutes while the device is unplugged may reset the system clock and return settings to factory defaults. Mobile Apps & Tools
Hi Sharp utilizes specific applications and software for device management:
Mobile Apps: Use Hi Sharp EX or Superlive Plus (available on iOS and Android) to manage your DVR remotely. hi sharp dvr reset password repack
PC Software: You can download the IP Tool (version 2.0) from the Hi Sharp Download Center to search for and manage DVR/NVR devices on your network.
How to Reset DVR to Factory Default without Password? - Reolink
To reset the password on your Hi Sharp DVR, you can use several methods ranging from simple default credentials to hardware-level resets. For a "repack" or fresh start, these steps will restore the device to its original factory state. 1. Try Default Credentials
Before performing a hard reset, try the standard factory default login information. Username: Admin Password: Admin, 123456, 888888, or 666666 2. Request a Dynamic Code
Many Hi Sharp units feature a security mechanism where you can retrieve access by contacting technical support.
Steps: Navigate to the "forgot password" or "retrieve password" screen on your DVR's local interface. Action: Screenshot the Dynamic Code page. To reset the password for a Hi Sharp
Email: Send this screenshot, along with your model and serial number, to sales@hisharp.com.tw to receive a temporary reset key. 3. Hardware Factory Reset
If software methods fail, you can physically trigger a reset to wipe all settings, including the password.
Reset Button: Look for a small pinhole or physical button labeled "Reset" on the back or bottom of the device. Press and hold it for 10–30 seconds while the device is powered on until you hear a beep.
Internal Battery Method: For some older H.264 models, opening the casing and removing the CMOS coin battery from the motherboard for a few minutes will reset the system clock. Once reinserted, the DVR often reverts to a specific default date (like 01/01/2000), allowing you to use a date-based "super password" or the standard factory default. 4. Search for Device using IP Finder If you are trying to access the unit over a network: Download the Hi Sharp IP Finder software to your PC. Ensure both the PC and DVR are on the same local network.
The tool should discover the DVR, where you can attempt to log in using the default Admin/Admin combination to change settings. Feature Idea: "Smart Recovery QR"
For your "repack" project, an interesting feature to develop would be an Offline Recovery QR Generator.Instead of requiring the user to email support, the DVR could generate a unique QR code based on its serial number and a rotating internal seed. The user could then use a companion mobile app (verified with their original registration) to scan this code and instantly generate a one-time-use reset pin, eliminating wait times for support emails. FAQ - Support | HI SHARP INTELLIGENCE HiSharp_PwReset_V2
Warning: Proceed at your own risk. Incorrect usage can erase your hard drive, brick the DVR, or void any remaining warranty.
When searching for a repack, you might find names like:
Always scan these files with VirusTotal — repacks are known to contain trojans or keyloggers.
Connect a USB-to-TTL adapter to the DVR’s 4-pin serial header. Using PuTTY (baud rate 115200), you can interrupt the boot process and run Linux commands (if the DVR runs embedded Linux). Command: rm /etc/passwd and reboot.
If these methods do not work, consider:
Use a repack only when:
Do not use a repack if:
To reset the password for a Hi Sharp DVR, you can use the built-in "Forget Password" feature or contact their technical support with specific device information. Password Reset Methods Dynamic Code Method: Navigate to the login screen on your DVR monitor. Click on Forget Password and then Retrieve Password. Select the Dynamic Code page.
Take a photo or screenshot of this page and send it to your regional distributor or seller.
Alternatively, email the screenshot along with your region, model number, and serial number to the Hi Sharp Support Team.
Default Credentials: If the device has been factory reset or is being set up for the first time, try the following common default settings: Username: admin Password: 123456
Physical Factory Reset: For some H.264 based DVR models, removing the CMOS battery (the coin-sized battery on the motherboard) for 5–10 minutes while the device is unplugged may reset the system clock and return settings to factory defaults. Mobile Apps & Tools
Hi Sharp utilizes specific applications and software for device management:
Mobile Apps: Use Hi Sharp EX or Superlive Plus (available on iOS and Android) to manage your DVR remotely.
PC Software: You can download the IP Tool (version 2.0) from the Hi Sharp Download Center to search for and manage DVR/NVR devices on your network.
How to Reset DVR to Factory Default without Password? - Reolink
To reset the password on your Hi Sharp DVR, you can use several methods ranging from simple default credentials to hardware-level resets. For a "repack" or fresh start, these steps will restore the device to its original factory state. 1. Try Default Credentials
Before performing a hard reset, try the standard factory default login information. Username: Admin Password: Admin, 123456, 888888, or 666666 2. Request a Dynamic Code
Many Hi Sharp units feature a security mechanism where you can retrieve access by contacting technical support.
Steps: Navigate to the "forgot password" or "retrieve password" screen on your DVR's local interface. Action: Screenshot the Dynamic Code page.
Email: Send this screenshot, along with your model and serial number, to sales@hisharp.com.tw to receive a temporary reset key. 3. Hardware Factory Reset
If software methods fail, you can physically trigger a reset to wipe all settings, including the password.
Reset Button: Look for a small pinhole or physical button labeled "Reset" on the back or bottom of the device. Press and hold it for 10–30 seconds while the device is powered on until you hear a beep.
Internal Battery Method: For some older H.264 models, opening the casing and removing the CMOS coin battery from the motherboard for a few minutes will reset the system clock. Once reinserted, the DVR often reverts to a specific default date (like 01/01/2000), allowing you to use a date-based "super password" or the standard factory default. 4. Search for Device using IP Finder If you are trying to access the unit over a network: Download the Hi Sharp IP Finder software to your PC. Ensure both the PC and DVR are on the same local network.
The tool should discover the DVR, where you can attempt to log in using the default Admin/Admin combination to change settings. Feature Idea: "Smart Recovery QR"
For your "repack" project, an interesting feature to develop would be an Offline Recovery QR Generator.Instead of requiring the user to email support, the DVR could generate a unique QR code based on its serial number and a rotating internal seed. The user could then use a companion mobile app (verified with their original registration) to scan this code and instantly generate a one-time-use reset pin, eliminating wait times for support emails. FAQ - Support | HI SHARP INTELLIGENCE
Warning: Proceed at your own risk. Incorrect usage can erase your hard drive, brick the DVR, or void any remaining warranty.
When searching for a repack, you might find names like:
Always scan these files with VirusTotal — repacks are known to contain trojans or keyloggers.
Connect a USB-to-TTL adapter to the DVR’s 4-pin serial header. Using PuTTY (baud rate 115200), you can interrupt the boot process and run Linux commands (if the DVR runs embedded Linux). Command: rm /etc/passwd and reboot.
If these methods do not work, consider:
Use a repack only when:
Do not use a repack if: