Install Driver Xprinter Xp-d4601b May 2026

To install the Xprinter XP-D4601B driver, you can follow these steps for Windows and Mac. This printer is a thermal label printer, often requiring the Seagull Scientific driver for best performance on Windows. Windows Installation

Download: Obtain the driver from the Xprinter Official Site or reputable third-party sources like Seagull Scientific.

Connect: Plug the USB cable into your PC and turn on the printer. Run Installer:

Right-click the downloaded .exe and select Run as Administrator. Accept the license agreement and click Next. Select Install printer drivers. Detect Printer: Select USB as the connection type.

Choose model XP-D4601B from the list if not automatically detected.

Finish: Complete the wizard and check the printer under Control Panel > Devices and Printers. Mac Installation Xprinter XP-D4601B Printer Drivers by Seagull Scientific Install Driver Xprinter Xp-d4601b

How to Install Driver Xprinter XP-D4601B: Complete Setup Guide

The Xprinter XP-D4601B is a high-performance, 4-inch direct thermal label printer designed for logistics, e-commerce, and retail. To ensure seamless operation on Windows, macOS, or Linux, you must correctly install the official drivers.

This guide provides a step-by-step walkthrough for downloading, installing, and configuring your XP-D4601B driver for peak performance.

Xprinter professional 4 inch thermal printer customized for tax

Installing the Xprinter XP-D4601B Driver To install the Xprinter XP-D4601B driver, you can

To ensure that your Xprinter XP-D4601B printer functions properly, you need to install the correct driver on your computer. Here's a step-by-step guide to help you through the process:

Step 1: Download the Driver

  1. Go to the Xprinter official website (www.xprinter.com) or search for the printer model "XP-D4601B" on the website.
  2. Click on the "Downloads" or "Support" section and select the operating system that you are using (Windows, macOS, or Linux).
  3. Locate the driver file for the XP-D4601B printer and click on it to download. The file should be in a format such as .exe or .zip.

Step 2: Extract and Install the Driver

  1. Once the download is complete, locate the driver file on your computer and extract it if necessary (if it's a zip file).
  2. Run the extracted file (usually with a .exe extension) and follow the on-screen instructions to start the installation process.
  3. Click "Next" or "Install" to proceed with the installation.

Step 3: Connect the Printer

  1. Connect the Xprinter XP-D4601B printer to your computer using a USB cable or through a network connection (if applicable).
  2. Ensure that the printer is turned on and properly connected.

Step 4: Complete the Installation

  1. The installation wizard will detect the printer and install the necessary drivers.
  2. Follow the on-screen instructions to complete the installation process. You may be prompted to restart your computer.

Step 5: Verify the Installation

  1. After restarting your computer, go to the "Devices and Printers" or "Printers and Scanners" section (depending on your operating system).
  2. Verify that the Xprinter XP-D4601B printer is listed and set as the default printer.

Troubleshooting Tips

By following these steps, you should be able to successfully install the driver for your Xprinter XP-D4601B printer. If you encounter any issues during the installation process, refer to the troubleshooting tips or contact Xprinter support for further assistance.

Pro Tip: Set the Xprinter as Default Printer

Before you begin

Method B: Manual Installation (For Stubborn USB or ZPL Mode)

Use this if the automatic installer fails or you need ZPL.

  1. Plug in the printer via USB. Windows will fail to find drivers – that’s fine.
  2. Open Device Manager (Right-click Start button).
  3. Find "Unknown device" or "Xprinter XP-D4601B" with a yellow exclamation.
  4. Right-click it → Update driver → Browse my computer for drivers.
  5. Click Let me pick from a list of available drivers on my computer.
  6. Click Have Disk → Browse.
  7. Navigate to your unzipped driver folder → select the .inf file (e.g., xprinter.inf or zebra.inf).
  8. Select the model: XP-D4601B (USB) or XP-D4601B (ZPL).
  9. Click Next. Ignore any "driver not signed" warning (select Install anyway).
  10. Restart your PC.

Features of Xprinter Xp-d4601b Driver:

Method C: Network Installation (Ethernet / Static IP)

For shared office use.

  1. Connect the Xp-d4601b to your router via Ethernet. Wait 2 minutes for DHCP to assign an IP.
  2. From the printer’s front panel, press Menu > Information > Print Config Page.
  3. Note the IPv4 Address (e.g., 192.168.1.125).
  4. On Windows, go to Settings > Bluetooth & devices > Printers & scanners.
  5. Click Add device → The printer that I want isn’t listed.
  6. Select Add a printer using an IP address or hostname → Next.
  7. Device type: Autodetect (or TCP/IP). Enter the IP address.
  8. Keep "Query the printer..." checked.
  9. When asked for driver, click Have Disk and point to the .inf file.
  10. Choose XP-D4601B (Ethernet).
  11. Name it → Finish.

3) Install on macOS

  1. Open the downloaded .dmg and run the installer package (.pkg).
  2. Follow prompts; you may need to allow the installer in System Settings → Privacy & Security.
  3. Connect the printer via USB when prompted.
  4. Open System Settings → Printers & Scanners; if the XP-D4601B isn’t auto-added, click “+” and add it from the USB list, selecting the Xprinter driver.
  5. Print a test page from System Settings or any app.

Troubleshooting (macOS)