Mks Laser Tool Setup V112exe Download Work Work Verified 【2025-2027】

MKS Laser Tool v1.1.2 is a crucial piece of software for managing and configuring laser engraving machines that use Makerbase (MKS) controller boards, such as the DLC32. This tool is primarily used for Wi-Fi configuration firmware flashing , and basic machine control. Setting Up the MKS Laser Tool

To get your laser engraver up and running with the v1.1.2 tool, follow these essential steps: Download and Extraction : The installer (typically a file within a archive) can often be found on the

provided with your machine or downloaded from official manufacturer support sites like Flying Bear Run as Administrator

: A common issue users encounter is the inability to click buttons within the software interface. To fix this, right-click the MKSLaserTool.exe and select "Run as administrator" to ensure all functions are enabled. Interface Navigation

: The installer may default to Chinese; generally, selecting the middle option on the installation screens will progress the setup. Firmware Updates

: You can use the tool to flash updated firmware to your board. For advanced users, the Makerbase online MKS TOOL

allows for visual firmware customization before exporting files to an SD card for the update. Key Features of MKS Tooling Wi-Fi Configuration : Enables wireless control of your engraver through the MKSLaser App on mobile devices. Direct Control

: Provides a simplified interface to send G-code commands and move the laser head without needing a full-scale design suite like LightBurn or LaserGRBL for every small adjustment. to your machine via Wi-Fi?

How to use the MKS Laser Tool if it you can't click on the buttons.

Getting Started with MKS Laser Tool V1.1.2: Setup & Troubleshooting

The MKS Laser Tool is an essential utility for anyone using Makerbase-powered laser engravers like the MKS DLC32. It simplifies firmware updates, WiFi configuration, and G-code previews. Here is how to download, install, and fix common "not working" issues. 1. Download the Installer

You can typically find the official MKSLasertool_setupV1.1.2.exe on the Makerbase GitHub Repository. Some manufacturers also provide it via cloud links or on the TF card included with your machine. 2. Installation Guide

Extract Files: The installer often comes in a .zip or .rar archive. Extract it to its own folder before running.

Chinese Interface: Don't be alarmed if the installer text appears in Chinese. Usually, clicking the middle option or "Next" (typically the bottom-right button) will proceed through the steps.

Driver Setup: Ensure you have the CH340 USB driver installed so your PC can recognize the engraver's COM port. 3. Making it "Work" (Troubleshooting)

If you’ve installed the tool but find that buttons are grayed out or unclickable:

Run as Administrator: Right-click the desktop shortcut or .exe and select "Run as Administrator." This is the most common fix for unresponsive buttons.

Connect First: Many functions, like WiFi setup, require the engraver to be physically plugged into your PC via USB and powered on before the tool can "see" the device.

Firmware Safety: Only flash firmware meant for your specific board (e.g., ESP32-S3 vs S1). Using the wrong .bin file can brick your machine. 4. Key Features

Firmware Flash: Use the "MKS ESP32 Download Tool" section to update your motherboard's operating system.

WiFi Configuration: Connect your laser to your home network without needing a touchscreen.

G-Code Preview: Add location previews to G-code files exported from software like GRBL.

Need help finding the correct firmware version for your specific laser engraver model? Flying Bear Laser MKS Software

To download and set up the MKS Laser Tool V1.1.2.exe for your Makerbase DLC32 board, follow these steps to ensure the software works correctly. 📥 Download the Software

The official installer is typically hosted on the Makerbase GitHub within their firmware or tool repositories.

Official GitHub Repo: You can find the toolset and related firmware updates at Makerbase-MKS / MKS-DLC32.

Alternative Source: Some users find the specific v1.1.2 executable in the MKS-TOOL repository . 🛠️ Setup & Fixes for "Work" Issues

If the software won't open or the buttons don't react after installation, apply these common fixes:

Run as Administrator: Right-click the .exe file and select "Run as administrator". This is the most common fix for unresponsive buttons within the MKS interface.

Language Selection: Upon first launch, the tool may be in Chinese. Look for the "Language" dropdown menu (usually in the top right or within the first setup screen) and switch it to English.

USB Drivers: Ensure your PC recognizes the DLC32 board. You may need to install the CH340 driver, which is the standard serial chip used by MKS boards.

Firmware Mismatch: If the laser doesn't fire, ensure your firmware version matches your board version. For example, some users found that reverting to v2.0.8_H35 resolved firing issues on specific DLC32 V1.0 boards. 💡 Key Features of the Tool

Image Slicing: Convert images directly into G-Code for engraving.

WiFi Configuration: Use the tool to set up your board’s WiFi credentials so you can control it via the mobile app.

Firmware Flashing: Easily update the board's internal software to the latest version.

The clock on the workshop wall read 2:47 AM. Rain lashed against the corrugated metal roof of Precision Prototypes, a sound that usually helped Leo focus. Tonight, it just felt like static in his brain.

His boss, Diane, had given him an impossible deadline: a full production run of etched titanium phone cases for a client who’d “already paid for expedited shipping.” The only problem was their trusty old MKS laser had thrown a firmware error during the final calibration. The display screen flashed a cryptic message: MKD-112e: Config Mismatch.

“You’ve got to be kidding me,” Leo muttered, wiping a bead of sweat from his brow. The titanium blanks were stacked, the vector files were ready, but the laser’s brain was fried. He grabbed the company laptop and dove into the service portal. mks laser tool setup v112exe download work work

After twenty minutes of searching through dead-end forums, he found it. A dusty, rarely visited section of the MKS legacy downloads. And there it was: mks_laser_tool_setup_v112exe.zip.

He hesitated. This wasn’t some simple driver. This was the tool setup—the low-level configuration utility that talked directly to the galvo scanners, the CO2 tube, and the focus diode. One wrong click and he could turn a $40,000 laser cutter into a very expensive paperweight.

“Work,” he whispered to the machine. “Please, just work.”

He double-clicked the .exe. The system prompted the usual warnings about unsigned software. He bypassed them. A progress bar appeared: Extracting core utilities… Then another: Configuring galvo resonance parameters…

The laser head twitched. A low hum filled the silence. Leo held his breath as the setup tool initiated a home cycle. The red dot of the alignment laser flickered to life, swept across the honeycomb table, and settled perfectly on the center mark.

Then, a soft beep. A dialog box popped up:

[MKS Laser Tool Setup v112] – Calibration Successful. System Ready.

Leo let out a long, shaky exhale. The tool hadn’t just fixed the error; it had optimized the step-response curves. He loaded a test file—a simple geometric pattern—and hit Start.

The machine didn’t stutter. It sang. The beam traced the titanium at speed, leaving a crisp, perfect black etch in its wake. It was running better than it had the day it was new.

By 5:00 AM, the last phone case slid off the belt. Diane would get her miracle shipment. Leo leaned back in his chair, looking at the laptop screen where the mks_laser_tool_setup_v112exe icon sat quietly in the download folder.

He closed the lid. “Good work, little file,” he said. Outside, the rain had stopped. The workshop was quiet, save for the gentle cooling fans of the MKS laser, finally at rest.

Setting up the MKS Laser Tool v1.1.2 is essential for managing firmware updates and WiFi configurations for laser engravers like the Mecpow or Longer series. Download and Installation

Official Sources: You can find the installer on manufacturer sites such as Mecpow's Download Center or the LONGER3D GitHub repository.

Execution: Run the MKSLaserTool-setup V1.1.2.exe file. If you encounter issues with unresponsive buttons, right-click the application and select "Run as administrator" to grant necessary permissions.

Language: Upon opening, you may need to switch the language setting to English for easier navigation. Key Setup Workflows Firmware Updates:

Connect your laser to your PC via a USB/Type-C cable and power it on. In the tool, select the MKS ESP32 Download Tool.

Identify the correct COM port (check Device Manager for the CH340 driver) and set the baud rate—typically 250,000 or 115,200 depending on your specific board model. Select your firmware .bin file and click Start to flash. WiFi Configuration: Enter the WiFi Configuration tool within the app.

Connect your PC to the laser's Access Point (AP) mode (e.g., a "MECPOW" network with password 12345678).

Input your home WiFi SSID and password, then click Connect WiFi. Use the "Get IP" button once connected to find the machine's local IP address for remote control via the MKSLaser mobile app or a web browser.

G-Code Preparation: The tool can modify G-Code files to add specific positioning codes or cooling fan commands before saving them to a TF card for offline engraving.

Are you setting this up for a Mecpow, Longer, or a custom build with an MKS DLC32 board?

The MKS Laser Tool v1.1.2 is a utility from Makerbase primarily used to flash firmware, configure Wi-Fi, and generate G-code for laser engravers like the MKS DLC32 series. 📥 Download and Setup

You can find the official software releases and installation packages through the following sources:

Official GitHub: The primary source for Makerbase software is the MKS-DLC32 GitHub repository, where you can find the Laser Tool in the software folder.

Manufacturer Links: Some manufacturers like LONGER3D also host mirrors of the tool for their specific machines.

Drivers: Ensure the CH340 USB driver is installed so your computer recognizes the laser control board. ⚙️ How to Make it Work

If the software opens but you cannot click any buttons, follow these steps:

Run as Administrator: Right-click the .exe file and select "Run as administrator" to unlock full functionality.

Connect Hardware First: The tool often requires a live connection to the laser engraver via USB before certain features (like Wi-Fi setup) become clickable. Select Correct Parameters: COM Port: Match the port found in your PC's Device Manager.

Baud Rate: Typically set to 115200 or 250000 depending on your board. Chip Type: Select ESP32 for modern DLC32 boards. 🛠️ Key Features

Firmware Flashing: Easily update or change your engraver's firmware by selecting the .bin file and clicking "Start".

Wi-Fi Configuration: Connect your laser to your local network without needing a touchscreen.

Image Processing: Convert JPG/PNG images into G-code for engraving.

These guides demonstrate how to install the tool, fix common 'unclickable' button issues, and flash your firmware:

How to use the MKS Laser Tool if it you can't click on the buttons. Resin Art & 3D Printing 7 Steps to Update the Firmware on Windows TWO TREES Official Flying Bear Laser MKS Software Roger's Shop

What model of laser engraver or motherboard (e.g., DLC32, DLC V2.0) are you using? MKS Laser Tool v1

Are you getting a specific error message when you try to run the .exe? Is your main goal to update firmware or setup Wi-Fi?

makerbase-mks/MKS-TOOL: MKS TOOL is a tool that ... - GitHub

MKS Laser Tool Setup: A Comprehensive Guide to V1.12EXE Download and Configuration

Introduction

The MKS laser tool is a popular choice among laser engraving and cutting enthusiasts. To get the most out of this powerful tool, it's essential to set it up correctly. In this feature, we'll guide you through the process of downloading and configuring the MKS laser tool setup V1.12EXE software.

What is MKS Laser Tool Setup V1.12EXE?

MKS laser tool setup V1.12EXE is a software package designed to control and configure the MKS laser tool. This software allows users to adjust settings, monitor performance, and optimize their laser engraving and cutting projects. The V1.12EXE version is a specific release that offers improved features and bug fixes compared to earlier versions.

Downloading MKS Laser Tool Setup V1.12EXE

To download the MKS laser tool setup V1.12EXE software, follow these steps:

1. Visit the official MKS website or a trusted download source.
2. Search for the MKS laser tool setup V1.12EXE software.
3. Click on the download link and select the correct operating system (Windows, macOS, or Linux).
4. Wait for the download to complete, then extract the software package to a folder on your computer.

Configuring MKS Laser Tool Setup V1.12EXE

Once you've downloaded the software, follow these steps to configure your MKS laser tool:

1. Launch the MKS laser tool setup V1.12EXE software.
2. Connect your MKS laser tool to your computer using a USB cable or network connection.
3. Select the correct device model and configure the communication settings.
4. Adjust the laser settings, such as power, speed, and resolution, according to your project's requirements.
5. Test the laser tool to ensure it's working correctly.

Key Features of MKS Laser Tool Setup V1.12EXE

The MKS laser tool setup V1.12EXE software offers a range of features, including:

• Improved user interface: An intuitive and user-friendly interface makes it easy to navigate and configure settings.
• Enhanced performance: Optimized algorithms and improved communication protocols ensure faster and more accurate laser engraving and cutting.
• New features: Support for new laser tube types, improved safety features, and bug fixes.

Troubleshooting Common Issues

If you encounter issues during setup or configuration, refer to the troubleshooting guide below:

• Connection issues: Check your USB cable or network connection.
• Software crashes: Restart the software and ensure your computer meets the system requirements.
• Laser tool not responding: Check the power supply and ensure the laser tool is properly connected.

Conclusion

The MKS laser tool setup V1.12EXE software is a powerful tool for controlling and configuring your MKS laser tool. By following this guide, you'll be able to download, configure, and optimize your laser engraving and cutting projects. If you encounter any issues, refer to the troubleshooting guide or contact MKS support for assistance.

Note: “mks laser tool” often refers to software for controlling MKS (Spectra-Physics) lasers or related industrial laser systems. The specific filename “v112exe” suggests version 1.12 of an executable installer. “Work work” likely indicates users seeking confirmation that the tool functions correctly.

7. Troubleshooting Common Issues

• COM Port Not Found: Ensure USB drivers (CH340) are installed correctly. Check Device Manager under "Ports (COM & LPT)."
• Laser Not Firing: Verify the wiring polarity. Ensure the laser switch is turned on. Check if the firmware supports the specific laser pin being used.
• Connection Failed: Check if another software (like Cura or LaserGRBL) is currently occupying the COM port. Only one software can access the port at a time.

2.2 Step-by-step installation

1. Disable real-time antivirus temporarily – Some laser tools modify system INI files or write to protected folders. Add the installer folder as an exclusion instead of disabling completely.
2. Right-click → Run as Administrator on setup_v112.exe.
3. Choose installation path – Avoid Program Files (x86) if possible; use C:\LaserTools\MKS\ to prevent permission issues when writing configuration files.
4. Driver installation – During setup, you may be prompted for “MKS USB Driver” or “Silicon Labs CP210x.” Allow it. If no popup, check the install folder for a Drivers subdirectory and manually install the .inf file.
5. Complete setup – Do not launch yet. Reboot.

7. Alternatives If v112exe Still Won’t Work Work

If after all steps the tool fails, consider:

• MKS Laser Tool v2.0 (newer) – requires paid license but is more stable.
• PyMKS (open-source Python library) – community tool for basic laser control.
• Terminal-based control – Use PuTTY or RealTerm to send raw SCPI commands like :SOUR:POW 1.5 to set power.

But for most legacy lasers, v112exe remains the gold standard – once correctly installed.

Conclusion

If you've followed these steps and the MKS laser tool V112 is still not working, you might want to:

• Consult the official documentation or user manual.
• Look for version-specific issues on forums or support groups.
• Contact MKS support directly for assistance.

This guide provides a general overview, and specific steps may vary based on your operating system and the exact model of your MKS laser control board.

Overview

MKS Laser Tool Setup v1.12.exe is a software tool designed to configure and calibrate laser cutting machines, specifically those using the MKS (Makerbase) controller. The software provides a user-friendly interface to adjust various settings, perform calibration, and optimize the laser cutting process.

Key Features

1. Connection Settings: Allows users to connect to the MKS controller via serial port, USB, or Ethernet. Users can select the port, baud rate, and timeout settings.
2. Laser Configuration: Enables users to configure laser settings, including:
   • Laser power (W)
   • Laser frequency (Hz)
   • Pulse width modulation (PWM)
   • Duty cycle (%)
3. Machine Settings: Allows users to configure machine-specific settings, including:
   • Machine type (e.g., laser cutter, engraver)
   • Axis configuration (e.g., X, Y, Z)
   • Stepper motor settings (e.g., steps per mm, microstepping)
4. Calibration: Provides a step-by-step calibration process to ensure accurate laser cutting and engraving. This includes:
   • Offset calibration
   • Scale calibration
   • Rotation calibration
5. Material Settings: Enables users to save and load material-specific settings, including:
   • Material type (e.g., wood, acrylic, metal)
   • Power and speed settings for different materials
6. Job Settings: Allows users to configure job-specific settings, including:
   • Job size (mm)
   • Resolution (DPI)
   • Cutting/engraving speed (mm/s)
   • Power and frequency settings for the job
7. Monitoring and Testing: Offers tools to monitor and test the laser cutting machine, including:
   • Real-time monitoring of laser power, temperature, and machine status
   • Test firing of the laser for safety and functionality checks
8. Safety Features: Includes safety features to prevent accidents, such as:
   • Software-controlled emergency stop
   • Laser timeout and shutdown
9. Update and Backup: Allows users to update the MKS firmware and backup/restore configuration settings.

User Interface

The user interface is designed to be intuitive and user-friendly, with the following features:

1. Tabbed Interface: Organizes settings and features into logical tabs (e.g., Connection, Laser, Machine, Calibration)
2. Graphical Displays: Visualizes data, such as laser power and temperature graphs
3. Alerts and Notifications: Displays warnings and errors for easy troubleshooting
4. Contextual Help: Provides helpful information and instructions throughout the software

System Requirements

The MKS Laser Tool Setup v1.12.exe software requires:

1. Operating System: Windows 10 (64-bit) or later
2. Processor: Intel Core i5 or equivalent
3. Memory: 8 GB RAM or more
4. Storage: 500 MB free disk space or more

Download and Installation

The software can be downloaded from the official website and installed on the user's computer. The installation process includes:

1. Download: Download the MKS Laser Tool Setup v1.12.exe file
2. Installation: Run the installer and follow the prompts to install the software
3. Configuration: Configure the software settings and connect to the MKS controller

By providing a detailed feature list, users can understand the capabilities and requirements of the MKS Laser Tool Setup v1.12.exe software, ensuring a smooth and efficient laser cutting experience.

Getting your MKS Laser Tool V1.1.2 up and running is a game-changer for anyone using boards like the

. This tool is essential for flashing firmware, configuring Wi-Fi, and optimizing your laser engraver's performance.

Here is a solid guide to downloading and setting up the software to ensure it "just works." 1. Where to Download MKS Laser Tool V1.1.2

While many manufacturers provide the software on a physical TF card, you can download it directly from official and trusted repositories: Makerbase Official: Often hosted on their GitHub Releases MKS DLC32 repository Partner Sites: Brands like offer verified versions of the MKSLaserTool for their specific machines. Direct Link: A community-shared version is available via Google Drive (ensure you scan any .exe for safety before running). 2. Installation & Pro-Tips for "Work Work"

The installation process is straightforward but has a few quirks you should know to avoid common headaches. Administrator Mode (Crucial): If you open the tool and find that buttons are unclickable , close it immediately. Right-click the and select "Run as Administrator" to unlock all features. Language Barrier: The clock on the workshop wall read 2:47 AM

The installer may appear in Chinese. Typically, selecting the middle option

on the main screen will proceed with the installation until you can reach the settings to change the language. Driver Check: Ensure the CH340 driver

is installed on your Windows machine so the tool can "see" your engraver via USB. 3. Key Features You'll Actually Use MKS ESP32 Download Tool: Use this to flash the latest firmware. Set the Baud rate to 250000 Flash size to 8MB for ESP32-based boards like the DLC32. WiFi Configuration Tool:

Connect your machine via USB, enter your SSID and Password, and click "Connect WiFi" . Once connected, use the button to find the address needed for mobile app control. MKS NC Tool:

This feature allows you to add position preview code to your G-code, which improves the speed of the "edge stroking" or framing function on your engraver. 4. Mobile Integration

Once your WiFi is set up, you can move away from the PC. Download the MKSLaser App Google Play Store

to control the stepper motors, transfer files, and monitor engraving progress directly from your phone.

How to use the MKS Laser Tool if it you can't click on the buttons.

MKS Laser Tool Setup V1.1.2: Your Complete Guide to Downloading and Getting It to Work

If you are working with an MKS DLC32 motherboard or a similar Makerbase controller for your laser engraver, the MKS Laser Tool is a vital piece of software. Specifically, version V1.1.2 (often searched as mks laser tool setup v112.exe) is the stable standard for flashing firmware, uploading images via Wi-Fi, and configuring your machine’s settings.

Getting this software to "work work" — meaning a successful install without driver errors or connection failures — requires following a specific sequence. This guide covers everything from the download to the final configuration. 1. Where to Download MKS Laser Tool V1.1.2

The most reliable source for Makerbase software is their official GitHub repository. Avoid third-party "driver" sites which may package the .exe with malware. Official Source: Visit the Makerbase MKS-DLC32 GitHub.

Locating the File: Navigate to the software folder. You will typically find the installer labeled as MKS LaserTool Setup 1.1.2.exe.

The Download: Download the executable directly to your desktop. 2. Essential Pre-Installation: The Drivers

The biggest reason the software fails to "work" is a missing communication bridge between your PC and the ESP32 chip on the MKS board.

Install CH340/CH341 Drivers: Most MKS boards use the CH340 USB-to-Serial chip. If your computer doesn't recognize the board when plugged in, the MKS Laser Tool will never find the COM port.

Verification: Open your Windows Device Manager. Under "Ports (COM & LPT)", you should see "USB-SERIAL CH340 (COMx)" without a yellow exclamation mark. 3. Step-by-Step Setup Guide

Once the file is downloaded and drivers are ready, follow these steps:

Run as Administrator: Right-click mks laser tool setup v112.exe and select Run as Administrator. This ensures the tool has permission to access your USB ports.

Choose Your Mode: Upon opening, you will see three main tabs:

WiFi Configuration Tool: For setting up your engraver on your local network.

Firmware Upload: For flashing the latest .bin files to the DLC32.

Image Tool: For converting photos into G-code or greyscale data compatible with the MKS mobile app.

Connecting the Hardware: Connect your MKS board to your PC via a high-quality USB cable. Cheap cables often provide power but no data, leading to "Connection Failed" errors. 4. Making it "Work Work": Troubleshooting Common Issues

If the tool opens but doesn't perform the tasks you need, check these three common friction points:

Baud Rate Mismatch: When flashing firmware, ensure the Baud rate is set to 115200. Setting it higher or lower will usually result in a "Timed Out" error.

Com Port Selection: If you have multiple devices plugged in, the tool might default to the wrong COM port. Click the refresh icon next to the Port selection dropdown and select the one corresponding to your CH340 driver.

Firewall Interference: If you are using the WiFi Configuration feature and the tool can't find your board, temporarily disable your Windows Firewall. The tool needs to broadcast a signal to the ESP32 to "handshake" the network credentials. 5. Why Use V1.1.2 Over Other Versions?

While there are newer iterations, V1.1.2 is widely regarded in the CNC community as the most stable build for the MKS DLC32 V2.1 boards. It provides the best balance of features — like the LPT (Laser Pattern Transfer) — without the UI bugs found in some beta releases.

By ensuring your drivers are updated and the USB connection is solid, the MKS Laser Tool V1.1.2 becomes a powerful ally in your laser engraving workflow.

It is important to clarify from the outset: “mks laser tool setup v112exe” is not a standard, publicly available software package from a major industry vendor like MKS Instruments (Newport/Spectra-Physics) or a known open-source laser controller framework.

Searching for this exact string typically leads to forums discussing industrial laser maintenance, custom calibration tools for Chinese CO₂ laser cutters, or potentially outdated/pirated software from obscure OEMs. The phrase “work work” in your query suggests a desire to make this tool actually function—likely after encountering errors, missing DLLs, or hardware communication failures.

Below is a comprehensive guide covering:

1. What this tool likely is (and what it is not).
2. Safe sources and alternatives.
3. Step-by-step installation and troubleshooting to make it “work work.”

D. Windows 11 or 64-bit Crash

The v112exe is 32-bit. On Windows 11 64-bit:

• Create a shortcut → Properties → Compatibility → Windows 10 mode + Reduced color mode (16-bit).
• Run as Administrator.

2. Software Overview

• Software Name: MKS Laser Tool (or MKS LaserGRBL/LaserTool)
• Version: v112 (Release 1.1.2)
• File Name: MKS Laser Tool Setup v112.exe
• Primary Function: Allows users to adjust laser focus, set PWM (Pulse Width Modulation) values, test firing the laser, and communicating with the motherboard via serial connection.

2.1 System prerequisites

• Windows 7/10/11 – v1.1.2 likely expects 32-bit or 64-bit but many old laser tools are 32-bit only.
• Administrator rights – Required to install drivers (USB-to-RS232, virtual COM port).
• .NET Framework 3.5 – Enable via Windows Features (many legacy laser tools depend on it).
• VC++ Redistributables – Install the 2010-2019 x86 and x64 versions.

5. Installation and Setup Workflow

The "work" aspect of the setup involves the following sequential steps:

Step 1: Execution

• Locate MKS Laser Tool Setup v112.exe.
• Right-click and select "Run as Administrator" to ensure proper driver installation permissions.

Step 2: Installation Wizard

• Follow the on-screen prompts.
• Select the destination folder (default is usually C:\Program Files (x86)\MKS Laser Tool).
• Complete the installation.

Step 3: Hardware Connection

• Connect the MKS controller board to the PC via USB.
• Ensure the laser module is connected to the board and powered on (if external power is required).

Step 4: Software Configuration

• Launch the MKS Laser Tool.
• Port Selection: Go to the connection settings. Select the COM port assigned to your board (e.g., COM3, COM4).
• Baud Rate: Set the baud rate to match the firmware (commonly 115200 or 250000).
• Click "Connect" or "Open".