Mt6755 Scatter File //free\\ -

Whether you are using the SP Flash Tool to revive a dead device or installing a custom ROM, the scatter file is the most critical component of the process. In this article, we’ll break down what it is, why it matters, and how to get one. What is an MT6755 Scatter File?

A scatter file is a small text document (usually .txt) that acts as a map for your device’s internal storage. MediaTek devices divide their memory into several partitions, such as recovery, system, boot, and userdata.

The MT6755 scatter file tells the flashing software (like SP Flash Tool) exactly where each part of the firmware begins and ends on the physical storage chip (eMMC). Without it, the software wouldn't know where to "drop" the files, potentially leading to a hard-bricked device. Key Information Found in a Scatter File: Platform: MT6755 Project: The specific build name for your device. Partition Index: The order of the storage blocks.

Linear Start Address: The physical starting point of a partition. File Name: The corresponding image file (e.g., system.img). Why Do You Need It?

Unbricking: If your phone is stuck in a boot loop or won't turn on, you need the scatter file to reinstall the factory firmware.

Backing Up: Before modding, developers use the scatter file to "read back" a copy of the existing partitions.

Custom Recovery: To install TWRP, you need the scatter file to target the specific recovery partition.

Bypassing FRP: Some technicians use specific addresses found in the scatter file to format the FRP (Factory Reset Protection) partition. How to Get the MT6755 Scatter File There are two primary ways to acquire this file: 1. Extracting from Stock Firmware mt6755 scatter file

The safest way is to download the official Stock ROM for your specific device model. Once you unzip the firmware folder, the scatter file (usually named something like MT6755_Android_scatter.txt) will be located in the main directory alongside the .img files. 2. Creating One via MTK Droid Tools or Miracle Box

If you can't find your firmware online but your device still boots, you can generate a scatter file directly from the phone. Enable USB Debugging.

Connect to a PC and use a tool like MTK Droid Tools (though compatibility with Helio P10 can be hit-or-miss) or WWR MTK.

The tool reads the partition table and saves it as a text file. How to Use the MT6755 Scatter File with SP Flash Tool Using the file is straightforward, but requires precision:

Install VCOM Drivers: Ensure your PC recognizes the MediaTek Preloader interface. Open SP Flash Tool: Launch the application.

Load Scatter: Click on the "Choose" button next to Scatter-loading File.

Select the File: Navigate to your firmware folder and select MT6755_Android_scatter.txt. Whether you are using the SP Flash Tool

Verify: The tool will automatically populate the list of partitions (Preloader, Recovery, System, etc.).

Flash: Choose "Download Only" (unless you are performing a full format) and click Download. Connect your powered-off device. Important Safety Warning

Never use a scatter file meant for a different chipset or even a different phone model.

Even if two phones both use the MT6755 (Helio P10) chip, their partition sizes—like the preloader—might differ. Using the wrong scatter file can result in a "Hard Brick," where the device will no longer communicate with the computer at all. Always verify your Hardware Version before proceeding. Conclusion

The MT6755 scatter file is the bridge between your computer and your phone's hardware. By understanding its structure and ensuring you have the correct version for your specific device, you can safely perform deep-level maintenance and customization on your Helio P10 device.

1. Overview

The MT6755 (marketed as MediaTek Helio P10) is a 64-bit octa-core SoC released in 2015. A scatter file (formally: MT6755_Android_scatter.txt) is a human-readable configuration file that describes the partition layout of the device’s eMMC flash memory. It is essential for:

A scatter file is device-specific – even two phones with an MT6755 may have different partition sizes and addresses. Flashing custom ROMs (e

Part 2: Anatomy of an MT6755 Scatter File

Let’s open a typical MT6755_Android_scatter.txt file. Here is a sanitized excerpt:

PRELOADER 0x0
__NODL_NFTL 0x0
MBR 0x0
EBR1 0x0
__NODL_BMTPOOL 0x0
pgpt 0x0
proinfo 0x8000
lk 0x100000
boot 0x200000
recovery 0x300000
para 0x400000
logo 0x500000
expdb 0x600000
secro 0x700000
nvdata 0x800000
metadata 0x900000
system 0xA00000
cache 0xB00000
userdata 0xC00000

Typical layout (example)

| Partition | Start Addr (hex) | Size (hex) | Typical file | |---|---:|---:|---| | PRELOADER | 0x00000000 | 0x00080000 | preloader_xxx.bin | | MBR | 0x00080000 | 0x00002000 | NONE | | UBOOT | 0x00100000 | 0x00040000 | uboot.bin | | BOOTIMG | 0x00180000 | 0x00400000 | boot.img | | RECOVERY | 0x00580000 | 0x00400000 | recovery.img | | SYSTEM | 0x00980000 | 0x1E000000 | system.img | | CACHE | 0x20780000 | 0x02000000 | cache.img | | USRDATA | 0x22780000 | 0x3D880000 | userdata.img |

(Addresses/sizes vary by vendor — above is illustrative.)

Understanding the MT6755 Scatter File: The Blueprint of the Helio P10

For any developer, technician, or advanced user working with MediaTek-based devices—specifically those powered by the MT6755 (Helio P10) system-on-chip—the scatter file is an indispensable tool. Often found with a .txt or .cfg extension, this file is essentially the memory map and partition layout blueprint for the device's flash storage (eMMC).

The Ultimate Guide to the MT6755 Scatter File: Structure, Usage, and Troubleshooting

1. Introduction

In the realm of Android device maintenance and repair, the Scatter File is a fundamental component, particularly for devices powered by MediaTek (MTK) chipsets. The MT6755, commercially known as the Helio P10/P15/P20, was a widely used 64-bit octa-core System on Chip (SoC).

A scatter file for the MT6755 is a text-based configuration file used by flashing tools (most notably SP Flash Tool) to map out the physical storage partitions of a device. Without this file, the flashing software cannot determine where to write specific data components like the bootloader, recovery, or system image on the device's NAND/eMMC memory.

Creating a Scatter for eMMC Re-partition

Advanced users can reallocate space:

system 0x2000000   # Increase system size
userdata 0xE000000 # Decrease userdata accordingly

Must match the partition_table checksum – or device won’t boot.

How scatter files are used