Ppt ((better)): Nfpa 30

Title: Flammable Liquids Code: An Informative Guide to NFPA 30

Slide 13: Electrical & Static Electricity

  • Classified locations (NEC Article 500) – Class I, Div 1 or 2.
  • Bonding and grounding – Ensure electrical continuity.
  • No open flames or unapproved spark-producing equipment in Class I areas.

A. Flammable Liquids

A flammable liquid is defined as any liquid having a closed-cup flash point below 100°F (37.8°C) and a vapor pressure not exceeding 40 psia at 100°F.

  • Class IA: Flash Point < 73°F; Boiling Point < 100°F (e.g., Ethyl Ether, Pentane).
  • Class IB: Flash Point < 73°F; Boiling Point ≥ 100°F (e.g., Acetone, Gasoline, Toluene).
  • Class IC: Flash Point ≥ 73°F and < 100°F (e.g., Turpentine, Xylene).

5. Inside Storage Rooms

For facilities with dedicated chemical rooms, dedicate a section of your PPT to: nfpa 30 ppt

  • Fire-Rated Walls: One-hour or two-hour fire resistance ratings.
  • Sills/Ramps: Requirements for containing spills (4-inch sills).
  • Ventilation: Mechanical ventilation requirements to prevent vapor accumulation.

3. Container and Portable Tank Storage

This is often the most violated section of the code. Your slides should cover:

  • Maximum Allowable Quantities (MAQ): How much liquid can be stored outside of a storage cabinet per control area?
  • Container Types: Rules for metal drums, plastic containers, and safety cans.
  • Visuals: Photos of compliant vs. non-compliant storage practices.

Slide 14: Operations & Maintenance (Housekeeping)

  • Spill control – immediate cleanup, absorbents.
  • Waste disposal – oily rags in covered metal waste containers.
  • Inspect containers – no bulging, rust, or leaks.
  • Training records – documented annually.

Chapter 4: Storage of Containers (Up to 60 Gallons)

This is the heart of most facility compliance. Title: Flammable Liquids Code: An Informative Guide to

  • Containers: Approved metal or plastic containers, proper labeling.
  • Storage Cabinets: Not to exceed 120 gallons total. Show a photo of a correctly labeled cabinet with "FLAMMABLE - KEEP FIRE AWAY."
  • Room Storage: Maximum quantities per control area (e.g., 120 gallons of Class IB in a sprinklered building).
  • Slide Design: Use a table comparing maximum container sizes per liquid class.

Chapter 6: Piping Systems

Less glamorous but critical.

  • Materials compatibility, joint types, and secondary containment.
  • Scenario Slide: "What’s wrong with this pipe?" (Show galvanized steel with a corrosive solvent.)

Building Your NFPA 30 PPT: Slide-by-Slide Template

Here is a proven 20-slide structure for a 60-minute training session. Classified locations (NEC Article 500) – Class I,

| Section | Slide Number | Content Focus | | --- | --- | --- | | Introduction | 1-3 | Title, agenda, why NFPA 30 matters (fire statistics) | | Definitions | 4-6 | Flash point, boiling point, liquid classes (chart) | | Hazard Classification | 7 | Case study: Mislabeled solvent causes fire | | Container Storage | 8-10 | Cabinets, shelf limits, secondary containment | | Bulk Storage | 11-13 | Tank spacing, diking, overfill protection | | Transfer Operations | 14-15 | Grounding/bonding, dispensing nozzles, PPE | | Housekeeping | 16 | Waste disposal, cleaning rags, ignition source control | | Emergency Response | 17-18 | Spill control, fire suppression, evacuation routes | | Quiz & Wrap-up | 19-20 | 5-question review, resources (NFPA link, local codes) |

Pro tip: Avoid text-heavy slides. Use the "5x5 rule" – maximum 5 bullet points, 5 words per bullet. Expand verbally.

Go to Top