Nokia 106 V100011 Imei Change Code Better May 2026

The Deep Dive: Nokia 106 (v100011), IMEI Change Codes, and What “Better” Really Means

Disclaimer: This post is for educational and cybersecurity research purposes only. Modifying the IMEI of a phone is illegal in most jurisdictions (including the US, EU, UK, and India). It can be prosecuted as felony fraud. The author does not endorse or provide tools for IMEI alteration.

The Myth of the Universal Code

If you search for “Nokia 106 IMEI change code,” you will find countless forum threads, YouTube videos, and shady websites offering magic codes like *#7465625# or *#*#3646633#*#*. Let’s address this immediately:

The Nokia 106 (v100011) does not support a USSD or secret menu code for IMEI rewriting. nokia 106 v100011 imei change code better

Why? Because the 106 is a Series 30+ feature phone. Unlike older MediaTek-based clones or legacy Nokia phones (e.g., 3310 classic), modern Nokia feature phones have locked NVRAM (Non-Volatile Random Access Memory). The IMEI is hard-burned into the chipset during manufacturing. No *# sequence will bypass hardware-level security.

2. The Technical Method (For Repair Technicians Only)

If you are a legitimate repair technician fixing a phone with a corrupted IMEI (Null IMEI), you cannot do this via the phone's keypad. You must use hardware and software tools: The Deep Dive: Nokia 106 (v100011), IMEI Change

• Hardware Required: You need a specialized USB data cable (some Nokia 106 models use a proprietary pinout) and a PC.
• Software Required: Professional service tools like Infinity Best, ** Miracle Box**, or SigmaKey.
• Process:
  1. You must open the phone or use a specialized cable to put the phone into Boot Mode (BROM Mode).
  2. The software tool disables the phone's security (if supported by the firmware version).
  3. You rewrite the NVRAM/IMEI partition.

Firmware Version V100011: Newer firmware versions (like V100011) often patch the "backdoors" that older service tools used to access the modem. If the phone has a secure boot fuse blown, it may be impossible to change the IMEI without high-level manufacturer credentials.

The “v100011” Clue – A Regional Variant

The v100011 appears to be a specific firmware version or hardware revision (likely for Indian or Southeast Asian markets). This version has additional carrier and regulatory locks. On this variant: Hardware Required: You need a specialized USB data

• AT commands via USB are disabled – No AT+EGMR=1,7,"new_IMEI"
• Factory mode is read-only – You can view the IMEI, not write it.
• Flash tools (e.g., Infinity, Miracle Box) require signed files – The bootloader rejects unsigned writes.

Step-by-step (technical outline):

1. Enter Local Mode – *#7820# (sometimes works on v100011) or use a resistor on the FBUS interface to force download mode.
2. Read the phone’s certificate (RPL) – Without this, you cannot write back the IMEI area.
3. Use a box like Infinity or ATF to generate a new IMEI block – The tool calculates the checksum and security signature.
4. Write via FBUS to NVRAM sector 0x8000 – This restores the original or repaired IMEI.

Important: If you attempt to write an IMEI that does not match the phone’s internal TAC (Type Allocation Code) – the first 8 digits – the baseband will reject it. The Nokia 106 has a TAC of 35899810 (for GSM 900/1800 variants). Changing the TAC requires a full motherboard replacement.

1. Why "Dialer Codes" Do Not Work

On older Nokia phones (like the 3310 or 1100), users could sometimes access engineering modes or use EEPROM reset codes. However, the Nokia 106 (2023) runs on a newer, locked-down operating system (Unisoc/Spreadtrum based).

• There is no hidden dialer code to write a new IMEI.
• The IMEI is stored in a protected area of the flash memory (NVRAM/Secure Boot area), not in the user-accessible file system.

You will need:

• A JAF or FBUS cable (DIY from a CA-42 data cable)
• Nokia BB5 / DCT4+ flasher (e.g., Phoenix Service Software or Infinity Best)
• A valid PM 308 backup from a donor phone (same model, same version)
• Your original IMEI printed on the phone label (under battery)

Why Do People Want to Change the IMEI?

1. Unblocking a lost/stolen phone – A blacklisted IMEI renders the phone useless on all major carriers.
2. Privacy paranoia – Some believe carriers track IMEIs for surveillance.
3. Repairing a corrupted IMEI – After a failed firmware flash, the IMEI becomes 000000000000000.
4. Cloning (illegal) – To commit subscription fraud.

Only #3 is a legitimate reason. If your IMEI is corrupted, the correct path is a full factory flash with a valid certificate, not a “code.”