Nokia Ta1034 Usb Driver Windows 10 64 Bit Hot!

For the Nokia 105 (TA-1034) Go to product viewer dialog for this item.

, you typically need the Nokia MTK (MediaTek) USB Drivers to enable flashing or firmware updates on Windows 10 (64-bit). These drivers allow tools like Infinity BEST to recognize the phone when it is connected via a USB cable. Key Driver Resources

Official Connectivity Drivers: You can download general connectivity drivers for various Nokia models from DriverScape (Version 1.0.0.4). Specific TA-1034 Drivers: Direct downloads for the

variant are available through DriverIdentifier for Windows 10 64-bit. nokia ta1034 usb driver windows 10 64 bit

Nokia USB Serial Port: For COM port functionality, DriverScape provides Version 7.1.32.115, which supports 64-bit Windows 10. Installation for Flashing (Windows 10 64-bit)

Installing MTK drivers on Windows 10 64-bit often requires disabling Driver Signature Enforcement because these drivers are sometimes not digitally signed for newer Windows versions:

Disable Signature Enforcement: Hold Shift while clicking Restart. Go to Troubleshoot > Advanced options > Startup Settings > Restart. Press 7 (or F7) to disable driver signature enforcement. Manual Installation: Open Device Manager. Connect your powered-off Nokia phone. For the Nokia 105 (TA-1034) Go to product

Right-click the "Unknown Device" (it may appear as "MT6261" or " ") and select Update Driver.

Choose Browse my computer > Let me pick from a list > Show All Devices > Have Disk and select the .inf file from your downloaded driver folder.

Confirm Warnings: Click "Install this driver software anyway" if Windows shows a security warning. Part 6: Troubleshooting Common Errors Even after following

Are you trying to flash the firmware or just transfer contacts/data?

Part 6: Troubleshooting Common Errors

Even after following the guide, you might encounter issues. Here’s how to fix them.

| Error Message | Likely Cause | Solution | |---------------|--------------|----------| | “The driver is not intended for this platform” | You are using a 32-bit driver on 64-bit Windows. | Download the correct 64-bit version of the MediaTek USB driver. | | “This INF file contains no driver information for this device” | Wrong INF file selected. | Try a different .inf file in the driver folder (e.g., mtkpreloader.inf). | | “Driver signature enforcement detected” | You forgot to disable enforcement. | Reboot and disable driver signature enforcement (see Phase A). | | Device Manager shows “Unknown USB Device” | Power surge or driver conflict. | Uninstall the unknown device, restart, disable USB selective suspend in Power Options. | | Phone charges but no data transfer | Bad USB cable or incorrect USB mode on phone. | Try a different cable. On the phone, swipe down and change USB mode from “Charging” to “File Transfer / MTP”. | | “The device cannot start (Code 10)” | Conflicting drivers. | Uninstall all Android/MTK drivers from Device Manager, reboot, and reinstall cleanly. |

Step 2: Install the Driver

  1. Download the driver package from the link above.
  2. Extract the ZIP file to a folder on your desktop.
  3. Open the extracted folder and look for the Install or Setup executable file.
  4. Right-click the file and select Run as administrator.
  5. Follow the on-screen instructions to complete the installation.

Step-by-Step Installation on Windows 10 64-bit

Installing the driver correctly requires circumventing Windows 10’s stringent driver signature enforcement in some cases. The most reliable method is as follows:

  1. Preparation: Download the official Google USB Driver (a compressed .zip file). Extract it to a permanent folder (e.g., C:\Android\usb_driver).
  2. Enable Developer Options: On the Nokia TA1034, go to Settings > About Phone and tap "Build Number" seven times. Then, in Developer Options, enable USB Debugging.
  3. Connect and Update Driver: Plug the phone into a USB 2.0 port (3.0 ports can sometimes cause detection issues). On the PC, open Device Manager. The Nokia TA1034 will likely appear as an "Unknown device" or with a yellow exclamation mark.
  4. Manual Installation: Right-click the unknown device, select Update driver > Browse my computer for drivers > Let me pick from a list > Have Disk. Navigate to the extracted folder and select the android_winusb.inf file.
  5. Select the correct model: In the list, choose "MTP USB Device" for file transfer or "Android ADB Interface" for debugging. Confirm any security warnings about driver verification.

Flashing tools & chipset drivers

  • If you intend to flash firmware:
    • For MediaTek devices use MTK VCOM drivers + SP Flash Tool.
    • For Qualcomm devices use Qualcomm QDLoader drivers + QPST or MiFlash.
  • Install appropriate drivers in Device Manager similarly via “Have Disk” or use driver installer packages from reputable sources. Reboot after installation.

7. Alternative: Using Google’s Official Driver (for ADB only)

If you only need file transfer and ADB (not flashing), you can use the official Google USB driver:

  1. Download Android Studio or standalone Google USB Driver from Google’s developer site.
  2. Extract and install via Device Manager as above.
  3. Add the Nokia TA-1034 Vendor ID (if missing). Vendor ID for Nokia (HMD Global) is 2E04. Add it to android_winusb.inf manually if needed.