The Nokia TA-1304 , better known as the 2019 or 2020 edition of the Nokia 105 Single SIM Go to product viewer dialog for this item.
, is a humble feature phone that often becomes the center of a high-stakes technical "rescue" mission. For many users, this phone is a reliable lifeline for simple communication, but when it encounters a software glitch—like a "Contact Service" error or a forgotten security code—it requires a specific digital antidote: the PAC file. The Legend of the "Dead" Nokia 105 Imagine a user who has relied on their Go to product viewer dialog for this item.
for years. Suddenly, the screen freezes on the Nokia logo, or the device refuses to boot past a certain point. To a typical user, the phone is "dead." However, to a technician, the phone is simply in a "soft-brick" state, waiting for its flash file—the complete firmware package that can rewrite the phone's entire operating system. The Role of the PAC File
Unlike Android smartphones that often use "scatter files," the Nokia TA-1304
belongs to a family of devices powered by Unisoc (Spreadtrum) chipsets. These chipsets use a unique file format called .PAC.
The Blueprint: The PAC file is a single, compressed archive containing every piece of the phone's software "soul"—from the bootloader to the ringtones and the alphanumeric keypad drivers.
The Key: Flashing a PAC file is often the only way to bypass a locked phone if the default security code (historically 12345) has been changed and forgotten. The Flashing Ritual
The story of the TA-1304 flash file usually takes place in a small repair shop or a home office. It involves: nokia ta1304 flash file pac file
Preparation: Hunting down the exact PAC file compatible with the TA-1304 variant, as using the wrong version could permanently "hard-brick" the device.
The Tool: Using software like the SPD Upgrade Tool or ResearchDownload to "read" the PAC file.
The Connection: Turning the phone off, holding a "boot key" (often the center button or a specific keypad combo), and plugging it into a PC.
The Resurrection: As the progress bar turns green, the PAC file is unpacked and written to the 4MB of internal storage. Within minutes, the Nokia logo reappears, and the phone "wakes up" as if it were brand new.
For those who use these phones, the Nokia TA-1304 PAC file isn't just data; it's the digital tool that keeps a simple, essential piece of technology out of the landfill and back in the hands of its owner. Nokia 150 user guide: Keys and parts - HMD
To flash the Nokia TA-1304 (Nokia 6310 4G), you must use the SPD Upgrade Tool because the device is powered by a Spreadtrum/Unisoc chipset. The firmware for this device is provided as a .PAC file, which contains all the necessary instructions and system partitions to restore or update the phone's software. Essential Requirements
Before starting, ensure you have the following components prepared: The Nokia TA-1304 , better known as the
Flash File: The official stock firmware in .PAC format for the TA-1304 model.
Flashing Tool: The SPD Upgrade Tool (also known as the Spreadtrum Upgrade Tool).
USB Drivers: Latest SPD/Unisoc USB Drivers must be installed on your PC so it can recognize the device in "Boot Mode".
Battery: At least 60% charge to prevent the device from powering off mid-process, which could lead to a permanent brick.
Backup: Flashing will erase all user data; ensure you have backed up any critical information. Flashing Procedure
Follow these steps to install the PAC file using the SPD Upgrade Tool:
Extract Files: Extract the downloaded tool, drivers, and firmware on your computer. Step 7: Finish
Install Drivers: Run the driver setup file to ensure your PC communicates with the phone.
Launch Tool: Open the UpgradeDownload.exe or ResearchDownload.exe from the tool folder.
Load Firmware: Click the "Load Packet" button (gear icon) and select your .PAC flash file. Wait for the tool to finish loading the file. Initiate Flash: Click the "Start Downloading" button (play icon). Connect Device: Turn off your Nokia TA-1304
Hold the Boot Key (usually the Star (*) or Hash (#) key for Nokia feature phones).
Connect the device to your PC via a USB cable while holding the key.
Monitor Progress: The tool should show a progress bar. Once finished, a green "Passed" or "Finish" message will appear.
Restart: Disconnect the phone, remove and re-insert the battery, and power it on normally. Flashing Guide for SPD Upgrade Tool | PDF - Scribd
Before diving into the flashing process, it is crucial to identify your device correctly. The Nokia TA1304 is typically a budget-friendly 4G smartphone running Android 9.0 (Pie) or Android 10 (Go Edition). Key specifications include:
Important Warning: Flashing the wrong firmware (e.g., using a TA-1304 file on a TA-1306) will hard brick your device.