Gamelauncher Studio
Loading

Openbullet This Config Does Not Support The Provided

) and the data types allowed within the configuration settings. Root Cause

Configurations in OpenBullet are built to accept specific data formats defined by regular expressions (Regex) in the Environment.ini

file. If a config is set only to accept the "Credentials" type and you upload an "Email" wordlist, the software blocks the job to prevent processing errors. How to Fix the Error 1. Adjust Config Settings (OpenBullet 2)

Most modern configs can be quickly updated through the user interface: Config Manager and select the problematic config. Navigate to the view, then find the Other Options Look for a section titled Wordlist Types Allowed Wordlist Types Ensure the type of your wordlist (e.g., Credentials ) is moved to the the config before trying to run the job again. Environment.ini Configuration

If the required wordlist type is missing entirely from your options, you must define it in your environment file: Locate the file at OB2\UserData\Environment.ini (for OpenBullet 2) or the root folder (for OB1).

Check that it includes a valid definition for the data you are using. A standard "Credentials" entry looks like this:

[WORDLIST TYPE] Name=Credentials Regex=^.*:.*$ Verify=True Separator=: Slices=USERNAME,PASSWORD Use code with caution. Copied to clipboard Ensure the matches the format of your text file (e.g., for colon-separated data). 3. Re-Select the Config in the Runner After making changes to a config's settings or the Environment.ini If you have a job already created in the , the changes may not apply immediately. Stop the current job, re-select the config

from the list, and then re-upload your wordlist to refresh the settings.

If you are importing configs from third parties, they may come with a custom Environment.ini

The screen flickered once—then held steady.

OpenBullet. The name alone carried weight in certain circles—those corners of the internet where data was currency and anonymity was armor. For Leo, it was just another Tuesday night. A cracked energy drink next to his keyboard, the hum of his desktop fans like white noise, and a fresh list of combos he’d scraped from a half-accessible forum dump.

He dragged the .txt file into the loader. Two hundred thousand lines. Email:password. Most of them garbage, but that was the game—you sifted through the sand until your fingers caught on something sharp.

Leo hit Start.

The bots whirred to life in the log window—green text crawling upward like vines on a trellis. Validating... Retrying... Captcha detected... Skipping. The usual rhythm. He leaned back, waiting for those rare, beautiful words: Hit.

But after thirty seconds, a different message appeared.

OpenBullet: This config does not support the provided input type.

He blinked. Read it again.

“What the hell?”

He’d used this config a hundred times. A custom LoliShift config for a mid-tier retail site—nothing fancy, but reliable. He checked the settings. Input type: Combo (email:pass). His file was exactly that. No weird delimiters. No empty lines. UTF-8 encoding.

He tried a smaller test list—ten combos he’d manually verified earlier that week.

Same error.

“Config’s broken,” he muttered, already reaching for his backup folder. Openbullet This Config Does Not Support The Provided

But the backup did the same thing. Then the third one. Every config he tried—old staples, fresh downloads, even a legacy Puppeteer config he’d written himself—threw the same red flag.

Does not support the provided input type.

Leo sat forward, the caffeine suddenly not strong enough. He opened the config file in a text editor.

It looked fine. XML structure intact. The input options clearly listed "email:pass" as accepted.

He closed the editor. Opened the OpenBullet console directly—bypassed the GUI. Same error.

That’s when he noticed something strange.

His system clock read 03:14 AM. He didn’t remember it being that late. Or that early. He’d started at 11:00 PM. Four hours? No—he’d only been running scans for twenty minutes.

He glanced at his phone.

03:14 AM.

He refreshed the browser tab he’d left open—the forum where he’d scraped the combos. The page loaded, but the date on the posts had changed. Last week’s threads now showed timestamps from next month.

Leo’s hands hovered over the keyboard. He wasn’t a superstitious person. If you made a living sneaking through other people’s broken security, you learned to trust only logic, logs, and layers.

But logic had nothing to say about the config error.

He opened a command prompt and pinged the retail site’s login endpoint—the one his config had hammered ten thousand times before without issue.

Request timeout.

He tried a different site. Same timeout.

Every target his configs had ever touched was now unreachable.

Not blocked. Not rate-limited. Just... gone. Like the door had never existed.

His machine’s fans kicked up. The log window on OpenBullet, still frozen on the error message, suddenly scrolled.

Attempting fallback... Fallback failed. This config does not support the provided reality frame.

Leo stared at those last two words.

Reality frame.

That wasn’t in any config he’d ever seen.

His mouse cursor moved on its own—just a pixel, just once. Then stopped.

The energy drink can was empty. He didn’t remember finishing it.

Leo shut the laptop lid.

The error message burned behind his eyes. And somewhere, in the quiet between 03:14 and whenever morning decided to arrive, he realized the truth.

The config hadn’t stopped working.

He—the input he provided—was what no longer fit.

The combos hadn’t changed. The targets hadn’t moved.

The error wasn’t a bug.

It was a door closing. And Leo wasn’t sure which side he’d been left on.

Mismatch in Config SettingsEach config has an "Allowed Wordlist Types" setting. If your wordlist is categorized as Credentials but the config only allows MailPass, the runner will block the job.

Fix: Go to the Config Manager, edit the config, navigate to Other Options (or Data tab in OB2), and ensure the wordlist type you are using is moved to the Allowed side.

Environment.ini MisconfigurationThe Environment.ini file defines the rules (regex) for what constitutes a valid wordlist type. If your wordlist doesn't match the regex defined for its type, OpenBullet may fail to process it.

Fix: Check your Environment.ini (located in the UserData folder). Ensure the regex for types like Credentials or UserPass matches your data (e.g., ^.:.$ for a standard colon separator).

Incorrect Data Selection in the RunnerWhen starting a new job, the Runner requires you to select both a config and a wordlist. If the wordlist was imported with the wrong type assigned to it, the conflict triggers this error.

Fix: Re-import your wordlist and explicitly select the type that matches your config's requirements (e.g., Credentials, URLs, or Emails).

Version Incompatibility (OB1 vs. OB2)Configs for OpenBullet 1 (.loli) and OpenBullet 2 (.opk) handle data types differently. While OB2 can often import older configs, manual adjustments to the data settings are frequently needed after the import. Quick Checklist for Fixing Open Config Manager: Check the Data or Other Options tab.

Verify Allowed Types: Ensure your specific wordlist type is in the "Allowed" list.

Save & Rescan: Always save the config and click "Rescan" in the Runner after making changes to ensure they take effect.

Are you using OpenBullet 1 or OpenBullet 2, and what is the specific Wordlist Type you are trying to run?

Here’s a short, clear write-up explaining the error “This config does not support the provided” in OpenBullet, including causes and fixes. ) and the data types allowed within the

Scenario 1: You have a Combo Config (expects email:pass), but you have a list of emails only.

Bad wordlist:

user1@example.com
user2@example.com

Fix: Convert your emails to combos using a text editor or OpenBullet's built-in wordlist tools. Add a dummy or placeholder password. For example, use "Find & Replace" to replace newline (\n) with :dummy\n. Result:

user1@example.com:dummy
user2@example.com:dummy

Note: This only allows you to run the config; the actual login will likely fail unless the site ignores the password field.

1. The Wordlist Type Mismatch

This is the most frequent culprit.

Every OpenBullet config is programmed to accept a specific "Input Type." When a developer makes a config, they usually choose one of three standard types:

The Problem: If you load a User:Pass wordlist, but the Config is set to expect an Email:Pass format, OpenBullet will reject the input because it doesn't know how to handle the data structure (or the config has validation logic checking for @ symbols that aren't there).

The Fix:

  1. Open your Wordlist manager in OpenBullet.
  2. Look at the "Type" of the wordlist you have loaded.
  3. Check the ReadMe or the title of the Config you downloaded.
  4. Ensure they match. If the config requires Email:Pass, you cannot use a User:Pass list.

2. The Slicer Configuration

Sometimes, the format is technically correct (e.g., it is an Email:Pass list), but the config doesn't know which part of the line is the email and which is the password.

OpenBullet uses a "Slicer" to cut the data lines into variables like <USER>, <PASS>, or <EMAIL>.

The Problem: The config might be looking for data separated by a specific character (delimiter). If your wordlist uses : (colon) but the config expects ; (semicolon) or a tab space, the slicer fails, and the config reports that it doesn't support the input.

The Fix:

  1. Open the Config editor.
  2. Navigate to the Start Block or the Settings section (depending on your OB version).
  3. Look for the Slicer or Input Data settings.
  4. Check the Delimiter setting.
    • Most configs use : as the separator.
    • Ensure the variables are mapped correctly (e.g., Slice 1 = Email, Slice 2 = Password).

Cause #2: Delimiter Mismatch (The Silent Killer)

Even if both the config and wordlist use a combo format, they might disagree on the separator (delimiter). The default delimiter in OpenBullet is a colon (:). However, some configs are hardcoded to expect a pipe (|), a semicolon (;), a tab (\t), or a space ( ).

The Error in Action: Your wordlist looks like this:

[email@example.com,password123]

But the config expects:

[email@example.com:password123]

Because the config's parser sees a comma instead of a colon, it cannot split the line into two variables. You will see: "This config does not support the provided key" or a similar generic refusal.

The Fix:

  1. Right-click your wordlist in the OpenBullet Wordlists tab.
  2. Select "Convert delimiter".
  3. Change the delimiter to match what the config expects (usually :).
  4. Alternatively, edit the config. In the Config Manager, under "Settings" > "Data", look for "Separator" and change it to match your wordlist.

Cause #3: Corrupted or Incompatible Config Version

OpenBullet has evolved. Older configs (e.g., made for OpenBullet 1.0.0) may not work on newer versions (OpenBullet 2.0) or vice versa. Also, configs are sometimes encrypted or partially corrupted during download.

The Error in Action: You download a config from a forum. It loads without an error message, but when you run it, you immediately get: "This config does not support the provided..." even though your wordlist seems perfect. The config's internal LoliScript may have missing or malformed SET or BLOCK commands that fail to initialize the data parser.

The Fix:

When the Error Persists: Advanced Troubleshooting

If you have tried all the above and the error remains, the issue may be deeper:

How to Fix the Error in Three Common Scenarios

Step-by-Step Troubleshooting

  1. Check config description – Usually states required format (e.g., combo, email:pass, list).
  2. Verify wordlist format – Open in Notepad++. Should match required structure.
  3. Test with one line – Use a single valid input to isolate the issue.
  4. Re-import config – Corruption may occur during download.
  5. Switch OpenBullet version – Some configs only work on OB1 (Ruri) or OB2.