The PolyVision interactive whiteboard brand is now under Polyvision
, though many legacy interactive products were historically supported by
. To get your board running, you must download the driver corresponding to your specific hardware model, such as the Walk-and-Talk Driver Download & Selection ēno Series : The most common legacy series. You can find the PolyVision Driver v. 3.3.0 for Windows (compatible with XP through 8/10) at TS USB/Walk-and-Talk : Drivers for older Touch Sensitive (TS) USB boards and Walk-and-Talk models are often hosted on aggregate driver sites like Driver Scape for Windows 7, 8.1, and 10. Plug-and-Play (PolyKey) Walk-and-Talk
models do not require a separate download; the driver installs automatically when you connect the
(the USB cable with an integrated flash drive) to your computer. Driver Scape Installation & Configuration Preparation
: Ensure all other applications are closed before beginning the installation. Installation : Run the downloaded file (often named IWB-Tool Setup ) and follow the on-screen prompts. Verification
: After installation, look for the PolyVision icon in your system tray (bottom right of your screen).
: Driver is running, but the pen/stylus is capped or disconnected. : The system is active and ready for use. Calibration : Right-click the system tray icon and select "Configure the Polyvision Driver" to access the calibration and alignment tools. EduGeek.net Legacy Support PolyVision TS USB Drivers Download
Finding the correct PolyVision interactive whiteboard driver can be a challenge since Steelcase (PolyVision’s parent company) transitioned its focus away from interactive hardware years ago. To get your board up and running, you specifically need the PolyVision Driver (formerly part of the PolyVision Accelerator or Webster software suites). polyvision interactive whiteboard driver download
Here is a comprehensive guide on how to locate, download, and install the drivers required for PolyVision eno, TS, and Walk-and-Talk series boards. Where to Download PolyVision Interactive Whiteboard Drivers
Because PolyVision no longer maintains a dedicated consumer software site, users must rely on legacy support archives.
The Steelcase Support Portal: Most PolyVision hardware support moved to the Steelcase education archives. Look for the "PolyVision Driver" version 6.0 or higher for Windows and Mac.
The PolyVision eno App: If you are using an eno board (the ceramic-steel surface that uses a Bluetooth stylus), you don't just need a driver; you need the PolyVision eno App. This software manages the Bluetooth connection between the stylus and the computer.
Third-Party Educational Repositories: Many school districts and universities still host the .exe or .dmg installers for their staff. If the official site is down, searching for "PolyVision Driver 6.4 download" on educational tech forums often yields direct links. Which Driver Version Do You Need?
Depending on your hardware, the software requirements change:
For eno 2610 / 2810 Series: You need the PolyVision eno App. This software includes the driver required to recognize the eno stylus.
For TS and Walk-and-Talk Series: These older boards typically require the PolyVision Driver v5.0 or v6.0. These boards connect via USB or a wireless dongle and rely on touch or a physical stylus. Operating System Compatibility: The PolyVision interactive whiteboard brand is now under
Windows: Most drivers support Windows 7 and Windows 10. For Windows 11, you may need to run the installer in Compatibility Mode.
Mac: Newer macOS versions (Catalina and later) often struggle with legacy PolyVision drivers due to 64-bit requirements. How to Install the PolyVision Driver
Disconnect the Board: Unplug the USB cable or Bluetooth dongle from your computer before starting the installation.
Run the Installer: Open the downloaded file (usually PolyVisionDriverSetup.exe).
Calibrate: Once installed, a small PolyVision icon should appear in your system tray (bottom right on Windows). Click it and select "Configure" or "Calibrate."
Connect Hardware: Plug in your board. The icon should turn from gray/red to color, indicating a successful connection. Troubleshooting Common Issues
Board Not Responding: Ensure the "PolyVision Service" is running in your Task Manager. If the icon in the tray is red, the driver doesn't see the hardware.
Calibration Drift: If the mouse cursor isn't lining up with your pen, run the Alignment/Orientation tool from the driver settings. You will be asked to tap a series of targets on the board. Step 4: Alternative Software (No Driver Required) If
Missing "Anoto" Service: PolyVision eno boards use Anoto technology. If the driver asks for Anoto software, it is usually bundled within the eno App installer. Transitioning to New Software
Since the original PolyVision Webster and Viziflex software are now obsolete, many users install the driver only for the hardware connection and then use modern annotation tools like Microsoft Whiteboard, Google Jamboard, or Smart Notebook to actually teach or present. AI responses may include mistakes. Learn more
If you cannot find a working driver, use the board as a passive touch surface with these third‑party apps:
| Software | Works With | Function | | :--- | :--- | :--- | | OpenBoard (openboard.ch) | Any USB-connected board | Full interactive whiteboard software (like old PolyVision Workspace) | | Microsoft Whiteboard | Windows 10/11 | Touch and pen input if Windows recognizes the board as a digitizer | | Google Jamboard (web) | Any browser | Works with mouse emulation |
✅ If your PolyVision board is detected as “HID-compliant touch screen” in Device Manager, you don’t need a PolyVision driver – use any whiteboard app directly.
The original PolyVision support site is archived here:
web.archive.org/web/2015*/polyvision.com/supportDownloading and installing the PolyVision driver (often referred to as the
) is the essential first step for enabling touch and stylus interactivity on legacy PolyVision whiteboards like the . While the hardware is highly durable due to its CeramicSteel
surface, the software experience varies significantly depending on your operating system and hardware model. Key Driver Features & Performance PolyVision® Interactive Whiteboard - Touchboards
Connections for all TSL and TS 610 or 810 Models . . . . . . . . . . . . 20. Connections for TS 600 Model. . . . . . . . . . . . . Touchboards Walk-and-Talk™ - User Guide