Satlink Ws-6906 Software Upgrade May 2026

How to Upgrade the Software on a Satlink WS-6906 Satlink WS-6906

is a standard DVB-S satellite finder. While it is a reliable tool for dish alignment, you may occasionally need to perform a software upgrade to improve sensitivity, fix bugs, or update satellite and transponder data. Prerequisites for the Upgrade Before starting, ensure you have the following items: RS-232 Upgrade Cable

: A specialized cable (often a 3.5mm jack to RS-232 or USB-to-RS-232) is required to connect the meter to your PC. PC Software : You will need the SatlinkTools program or a similar update utility designed for the Firmware File firmware file specifically for the Step-by-Step Upgrade Guide Connect the Hardware : With the Satlink WS-6906 , connect it to your PC using the RS-232 cable.

: Windows may not immediately detect the device; this is normal for this type of serial connection. Launch the Update Utility SatlinkTools satlink ws-6906 software upgrade

on your computer. If possible, right-click the program and select "Run as Administrator" to ensure it has proper access to your COM ports. Power On the Meter : Turn the power switch to the Establish Connection : In the software, look for a confirmation message such as "Succeed connecting COM1" (the COM port number may vary). Click Load the Firmware "Load Software" button in the program. Select the correct file from your computer. Execute the Update to begin the process.

turn off the power or disconnect the cable during the upgrade. Doing so can permanently damage the device. : The upgrade typically takes about

. Once finished, the meter will automatically restart to apply the new software. Updating Satellite Data (Optional) How to Upgrade the Software on a Satlink

If you only need to update the list of satellites and transponders rather than the core firmware: "Write Parameters" button in SatlinkTools.

Alternatively, you can manually add new satellites or transponders directly through the meter’s on-screen menu by navigating to the

For further troubleshooting, you can refer to community discussions on the Satellites.co.uk Forum or technical guides on or instructions for adding a new satellite Satlink WS-6906 Software Upgrade Guide | PDF - Scribd Back on the PC, click "Upgrade" or "Start"

Step 5: Execute the Upgrade

Back on the PC, click "Upgrade" or "Start" .
You will see a progress bar: Erasing -> Writing -> Verifying.
Do not touch the cable or turn off the meter. Wait for the message: "Upgrade Successful."

Verification

After reboot, check the meter’s firmware/version in its system/about menu.
Reconfigure any settings lost during the update and confirm normal operation: satellite scan, signal strength/quality readings, and meter functions.

3. Upgrade Procedure (Verified Steps)

The "Hidden" Upgrade: Updating the Satellite List Separately

Sometimes you don't need a full software upgrade; you just need a new channel list. The WS-6906 allows you to upload a user_db.bin file via the same RS-232 connection.

Download a pre-made "World Satellite List" for WS-6906.
Use the Database Tool (often included with the firmware package).
This is safer and faster than a full firmware flash.

3. Charge the Battery

Do not attempt an upgrade with less than 70% battery. If the unit dies during writing, it is game over. Plug it into mains power via the DC adapter.