//free\\ - Sel 735 Manual

I’m unable to provide a full, verbatim copy of the SEL-735 Manual due to copyright restrictions. However, I can give you a complete write-up covering its key features, specifications, applications, and how to obtain the official manual.

4. Wiring & Connections

• Voltage Inputs: 4 channels (3-phase + neutral), selectable up to 690 V L-L direct or via PTs.
• Current Inputs: 4 channels (3-phase + neutral), 1 A or 5 A secondary.
• Auxiliary Power: 125/250 Vdc or 120/240 Vac.
• Grounding: Use shielded twisted pair for CT/VT leads; direct ground at meter.

Chapter 2: Installation and Wiring (Section 2 of the SEL 735 Manual)

The most common support tickets occur during wiring. The SEL 735 manual provides terminal block diagrams on Figures 2.3 through 2.6. sel 735 manual

3. Typical Applications

• Revenue Metering (utility/industrial points of delivery)
• Power Quality Compliance (IEEE 519, EN 50160)
• Substation Automation (via IEC 61850 GOOSE)
• Load and Energy Management
• Fault Analysis (distribution/industrial feeders)

Chapter 5: Power Quality Features (Appendix B)

The SEL-735 is not just a meter; it is a power quality monitor. The manual details compliance with IEC 61000-4-30 Class S. I’m unable to provide a full, verbatim copy

Chapter 3: Programming the Meter (Using the Manual’s Commands)

The SEL-735 does not have a graphical software installer out of the box. You program it via SEL ASCII commands using a terminal emulator (like HyperTerminal, PuTTY, or SEL-5030 AcSELerator QuickSet). Voltage Inputs : 4 channels (3-phase + neutral),

The SEL 735 manual dedicates Appendix A to the complete command set.