Sharp Ar-m165 Driver Windows 10 _top_ ⭐

The Sharp AR-M165 does not have an official Windows 10 driver, as it is a legacy device. To use this printer on Windows 10, you must use a compatible substitute driver or a Windows Update driver. Recommended Drivers for Windows 10

Since an AR-M165 specific driver for Windows 10 was never released by Sharp, the following options are your best bet:

Sharp Universal Print Driver (PCL6/PostScript): This is the most reliable way to connect older Sharp models to modern OS versions. It is designed to support a wide range of Sharp MFP devices.

AR-M207 / AR-M205 Windows 7 Driver: Many users have successfully installed the Windows 7 (64-bit) driver for similar models in "Compatibility Mode" on Windows 10. sharp ar-m165 driver windows 10

Windows Update Catalog: Connecting the printer via USB and running Windows Update may allow Windows to find a generic "Sharp Digital MFP" driver that supports basic printing. How to Install

Download the Sharp Universal Print Driver from the official Sharp Global Support site. Extract the files but do not run the setup immediately.

Go to Settings > Devices > Printers & Scanners > Add a printer. Select "The printer that I want isn't listed." The Sharp AR-M165 does not have an official

Choose "Add a local printer or network printer with manual settings."

Select the port (USB001 for USB or a TCP/IP port for network).

Click "Have Disk" and browse to the folder where you extracted the Universal Driver. 32-bit vs

Select the .inf file and follow the prompts to complete the installation. Paper Handling & Settings

Paper Size: Ensure the driver is set to Letter or A4 depending on your region. Older drivers often default to a size that causes "Paper Mismatch" errors on the physical machine.

Print Quality: If using the Universal Driver, set the resolution to 600 dpi for the best balance of speed and clarity.

32-bit vs. 64-bit:

The AR-M165 Universal Driver (v3.0+) works with 64-bit Windows 10.
The legacy Windows XP driver is 32-bit only and will not install on 64-bit Windows 10.
Check your system: Go to Settings → System → About → System type. If it says “64-bit operating system,” you must use a 64-bit driver (Windows 7/8.1 version).

How to Install in Compatibility Mode

Extract the downloaded driver files to a folder (e.g., C:\Sharp_AR_M165).
Locate the .inf file (usually oemsetup.inf or similar).
Right-click it → Properties → Compatibility tab.
Check "Run this program in compatibility mode for:" and select Windows 7.
Also check "Run this program as an administrator".
Click Apply → OK.
Now, right-click the .inf file again and select Install.
Follow the on-screen prompts. If Windows warns about an unsigned driver, click "Install this driver software anyway".

Method 4: Network Printing (If You Have the AR-NB3 Network Card)

Some AR-M165 units have the optional AR-NB3 network interface card. This is a game-changer because network printing is more forgiving than USB.

Assign a static IP to the AR-M165 via its operation panel (refer to the manual for network settings).
On Windows 10, go to Settings → Devices → Printers & Scanners → Add a printer or scanner.
Click "The printer that I want isn't listed".
Select "Add a printer using a TCP/IP address or hostname" → Next.
Enter the IP address (e.g., 192.168.1.100).
When prompted for the driver, again use HP LaserJet 4050 PCL6 or the legacy Sharp driver.
Complete the installation.

Network scanning via TWAIN is possible but requires advanced configuration of your firewall and the Sharp Network Scanner Tool (Windows 7 version).