Reset Upd: Traice Dvr Password

Traice DVR Password Reset Update: A Step-by-Step Guide

Are you struggling to reset your Traice DVR password? Look no further! In this detailed blog post, we'll walk you through the updated steps to reset your Traice DVR password, ensuring you regain access to your device in no time.

What is Traice DVR?

Before we dive into the password reset process, let's briefly introduce Traice DVR. Traice is a popular brand of digital video recorders (DVRs) used for surveillance and security purposes. Their devices are widely used in various industries, including retail, banking, and government, to monitor and record video footage.

Why Reset Your Traice DVR Password?

You may need to reset your Traice DVR password for several reasons:

1. Forgotten password: You've forgotten your current password and can't access your device.
2. Locked out: You've entered the wrong password multiple times, and your device is now locked out.
3. System update: You've updated your device's firmware, and the password has been reset.

Pre-Requisites for Password Reset

Before starting the password reset process, ensure you have the following:

1. Access to the device: You have physical access to your Traice DVR device.
2. Device information: You know your device's model number, serial number, and current firmware version.
3. Admin credentials: You have the admin username and password (if applicable).

Step-by-Step Password Reset Process

Follow these updated steps to reset your Traice DVR password:

Method 1: Using the Web Interface

1. Connect to the device: Connect your computer to the same network as your Traice DVR device.
2. Open a web browser: Open a web browser (e.g., Google Chrome, Mozilla Firefox) and navigate to the device's IP address (default: 192.168.1.100).
3. Login: Enter your admin username and password (if applicable).
4. Go to System Settings: Click on System Settings > User Management.
5. Reset Password: Click on Reset Password and follow the prompts to create a new password.
6. Reboot: Reboot your device to apply the changes.

Method 2: Using the Device's Keypad

1. Access the device: Physically access your Traice DVR device.
2. Press and hold: Press and hold the Menu button and the OK button simultaneously for 5 seconds.
3. Enter the default password: Enter the default password (admin or 12345) using the device's keypad.
4. Navigate to System Settings: Use the navigation buttons to go to System Settings > User Management.
5. Reset Password: Select Reset Password and follow the on-screen instructions to create a new password.
6. Reboot: Reboot your device to apply the changes.

Method 3: Using the Traice DVR Software

1. Download and install: Download and install the Traice DVR software (e.g., Traice Client) on your computer.
2. Connect to the device: Connect to your Traice DVR device using the software.
3. Login: Enter your admin username and password (if applicable).
4. Go to System Settings: Click on System Settings > User Management.
5. Reset Password: Click on Reset Password and follow the prompts to create a new password.
6. Reboot: Reboot your device to apply the changes.

Troubleshooting Tips

If you encounter any issues during the password reset process:

1. Check the device's IP address: Ensure you're using the correct IP address to access the device.
2. Verify admin credentials: Double-check your admin username and password (if applicable).
3. Contact Traice support: Reach out to Traice's customer support team for assistance.

Conclusion

Traice DVR Password Reset: Ultimate Guide (2026 Update) Locked out of your Traice security system? It happens to the best of us. Whether you’ve inherited a system, forgotten a complex code, or are dealing with a "Password Error" after a firmware update, regaining access is critical for your property’s security.

This updated 2026 guide covers the most reliable methods to perform a Traice DVR password reset using the latest software tools and hardware hacks. Method 1: The Default Credentials (Start Here)

Before trying technical workarounds, ensure you haven't overlooked the factory defaults. Many Traice models (and their OEM equivalents) ship with these common combinations: Username: admin

Password: 123456, 888888, password, or simply leave it blank.

Note: If these don't work, the password was likely changed during the initial setup wizard. Method 2: The "Forgot Password" QR Code Link

Most modern Traice DVRs (post-2023 firmware) feature a self-service recovery option built into the login interface.

Click the "Forgot Password" or the "?" icon on the login screen. A QR Code will appear on the monitor.

Open the mobile app used with your system (often XMEye, TSeye, or a proprietary Traice app). Navigate to Me > Password Reset > Scan QR Code.

A temporary master code will be sent to the email address or phone number linked to the account during setup. Method 3: Reset via Super Password (Hard Reset)

If your DVR isn't networked, you can use a "Super Password" generated based on the system's current date.

Look at the Date and Time displayed on your DVR’s live view screen (e.g., 05-04-2026). traice dvr password reset upd

Traice systems often use the Super Password Tool or CCTV Password Decryptors. Common algorithms for Traice/XMEye boards:

Method A: Use the "SuperPassword" desktop app. Input the date shown on the DVR.

Method B: Try the universal 2026 "Backdoor" codes: 000000 or 111111 (though these are rarely active on newer firmware for security reasons). Method 4: Hardware Jump (The "Last Resort")

If software methods fail, you may need to physically reset the motherboard. Warning: This may void your warranty. Power off the DVR and unscrew the outer casing. Locate the CMOS battery (the silver coin-shaped battery).

Remove the battery for 2–5 minutes, then reinsert it. This often resets the system clock to a factory date (like 01-01-2000), allowing you to use a known default "Super Password" for that specific date.

Alternatively, look for two pins labeled "J1" or "Reset" on the motherboard. Shorting these with a screwdriver while powering the unit on will factory reset most Traice models. Method 5: Contacting Traice Support

If you have a customized enterprise-grade Traice unit, the security might be "locked to MAC."

Find the MAC Address or Serial Number (S/N) on the sticker at the bottom of the unit.

Email a photo of this sticker to Traice official support or your local vendor. They will provide a one-time Reset Key valid for 24 hours. Preventing Future Lockouts Once you’re back in, immediately: Set a Security Question. Link a Recovery Email.

Update the Firmware: Newer versions offer better recovery options and fix security vulnerabilities that "password crackers" exploit.

Are you seeing a specific error code or a QR code on your screen right now? I can help you decode it if you provide the details.

It looks like you’re asking for a review of the "Traice DVR password reset update" process or tool.

Here’s a straightforward review based on common user experiences with Traice DVRs (often sold under generic H.264/H.265 surveillance brands): Traice DVR Password Reset Update: A Step-by-Step Guide

4.2 Physical Reset (when login is impossible)

1. Locate the reset pinhole on the back panel (usually near the power connector).

2. With the DVR powered on, press and hold the reset button for 10 seconds.

3. Release; the device will reboot and display “Factory Reset” on the splash screen.

4. After reboot, the default credentials are:

   • Username: admin
   • Password: 12345 (or as printed on the label).

5. Immediately log in and change the password via the web UI (see 4.1).

Error: "Network Locked – Restart 59 Minutes"

• Cause: You attempted the wrong password >5 times.
• Fix: Unplug the DVR for 1 full hour, or power cycle it 3 times quickly. This resets the lockout timer.

2. The "Telnet" Backdoor (Advanced)

Many Traice and XMeye-based DVRs run a Linux kernel that leaves port 23 (Telnet) open or easily accessible.

The Theory: If you can access the Telnet port, you can often log in with a "root" account that has a hardcoded, unchangeable password (common in older firmware).

The Execution:

1. Use a tool like Putty to scan the DVR’s IP on port 23.
2. Try default root credentials (often root / xmhd2012, root / hi3515, or similar).
3. If successful, you have root shell access. You can then navigate to the password file (often located in /etc/passwd or /mnt/mtd/config/) and manually delete the password hash line for the admin user using Linux commands (vi or sed). Upon reboot, the admin password is cleared.

3. Password reset via email or phone (cloud models)

For TRAICE DVRs with P2P/cloud access:

• Open the mobile app (like TRAICE View or IPC360 or Yoosee depending on rebrand).
• Tap Forgot Password on the login screen.
• Enter the DVR’s device ID (found on a sticker on the DVR casing).
• A reset code will be sent to the registered email/phone.
• Enter the code and set a new password.

---

✅ The Good:

• Free option exists – Many Traice DVRs have a backdoor reset using specific firmware or a reset file via USB.
• No cloud dependency – Unlike modern IP cameras, you don’t need an app account or internet to attempt reset.
• Some users succeed – If you have the admin email/security question, the reset process works as intended.

3. Preparation

1. Gather required info

   • DVR’s IP address (found on the device label or via your router).
   • Admin account email (if set).
   • Physical access to the DVR (for the reset button).

2. Ensure network stability

   • Verify the DVR is reachable via ping (ping <IP>).
   • Disable any VPN or proxy that might block local traffic.

3. Backup current settings (optional)

   • Log into the web UI (if possible) and export the configuration file.

---

Method 3: Physical Reset (The Reset Button)

For older units or units where the software methods fail, a physical reset is the most reliable option. This will typically reset the admin password to factory defaults (often admin or 12345). Forgotten password : You've forgotten your current password

1. Power Down: Turn off the DVR using the rear power switch and unplug it.
2. Open the Case: Warning: This may void your warranty. You will need to open the DVR casing (usually by removing screws on the side/back) to access the motherboard.
3. Locate the Jumper/Button: Look for a small button labeled RESET or a set of pins with a jumper cap (similar to those found on a computer motherboard).
4. Short the Pins:
   • If it is a button: Press and hold it.
   • If it is a jumper: Remove the cap, move it to the adjacent pins for 10 seconds, and then move it back.
5. Restart: Plug the power back in and turn on the device while holding the button (if applicable).
6. Login: The password should now be reset to factory defaults.