Pokemon
About

Usbprint Canondevicef144 !!top!! ❲PLUS · SECRETS❳

The identifier USBPRINT\CanonDeviceF144 is a hardware ID used by the Windows operating system to identify a specific Canon printer connected via a USB port. Hardware IDs like this allow Windows to match the physical device with the correct driver software in its database. Identification and Related Models

While "DeviceF144" is a technical internal string, it is most commonly associated with the Canon PIXMA iP2770

inkjet printer. This specific hardware ID often appears in system logs or device managers when: The printer is being installed for the first time.

There is a driver conflict, causing the device to appear as an "Unknown Device".

A user is attempting to "reset" the printer using service tools to clear error codes like (waste ink counter full). Common Issues and Drivers

If your computer identifies a device with this string but cannot use it, it typically indicates a driver issue. Driver Mismatch

: In some rare cases, automated driver update tools may incorrectly associate this ID with unrelated hardware, such as network adapters (e.g., HP NC7770). You should ignore these suggestions and use official Canon software. Service Mode usbprint canondevicef144

: This ID frequently appears when a Canon printer is put into Service Mode for maintenance or resetting. Recommended Troubleshooting Identify the Physical Model

: Check the front or top of your printer for a model name like PIXMA iP2770 Download Official Drivers : Visit the Canon Support Page

and search for your specific model name to download the latest "MP Drivers" or "Full Driver & Software Package". Reset the USB Connection

: If the printer is not recognized, disconnect the USB cable, uninstall any existing printer software via the Control Panel

, restart your PC, and then reconnect the cable to trigger a fresh discovery. Microsoft Learn for a particular Canon model?

The string USBPRINT\CanonDeviceF144 is a hardware ID used by the Windows operating system to identify a specific printer model connected via USB. This specific ID is most commonly associated with the Canon PIXMA iP2770 (also known as the iP2700 series) inkjet printer. Identification of USBPRINT\CanonDeviceF144 Go to the official Canon support website ( canon

When you connect a printer to a Windows PC, the system searches for a matching driver using this hardware ID. If your computer displays this string instead of the printer's name, it typically means the correct driver is missing or the printer is in a service mode. Primary Device: Canon PIXMA iP2770 / iP2700 series. Connection Type: USB (indicated by the USBPRINT prefix).

Common Context: This ID frequently appears in technical guides for "resetting" printers that have encountered a 5B00 error (waste ink counter full). Troubleshooting and Drivers

If your device is showing up as CanonDeviceF144 and not working, follow these steps:

Install Official Drivers: Visit the Canon Support page and search for PIXMA iP2770 or iP2700 series drivers. Installing the full software package will replace the generic hardware ID with the correct printer name.

Check Connection: Ensure you are using a high-quality USB cable. Long or damaged cables can cause the system to misidentify the device.

Port Configuration: If the driver is installed but the printer won't print, verify that the "Port" in Printer Properties is set to a virtual USB printer port (e.g., USB001). Mapping to model

Hardware Reset: If the printer is stuck in an error state, you may need to perform a manual reset. This often involves holding the Stop button while powering on the device to enter "Service Mode," at which point the CanonDeviceF144 ID is often detected by reset utility software. Is it another device?

While primarily linked to the iP2770, hardware IDs can occasionally appear in driver databases alongside other components if a computer's system scan was performed while multiple drivers were missing. Some databases might list it near Ethernet or server adapter drivers, but these are unrelated to the actual printer hardware.

The string "usbprint canondevicef144" is a USB Hardware ID (Device ID) used by the Windows operating system to identify a specific printing device connected via a USB port.

Here is a breakdown of the feature:

Fix 2: Install the Official Canon Driver (Most Reliable)

Windows Update often fails to fetch the correct driver for DEVICEF144. Do it manually:

  1. Go to the official Canon support website (canon.com/support).
  2. Enter "PIXMA MG3022" or "MG3050" (both use the same driver package).
  3. Select your version of Windows (e.g., Windows 10/11, 64-bit).
  4. Download the Full Driver & Software Package (not just the scanner driver).
  5. Run the installer before connecting the printer via USB. Many Canon drivers fail if the printer is already connected.
  6. When the installer prompts you, then connect the USB cable and turn on the printer.
  7. Complete the installation. The usbprint canondevicef144 entry will vanish from Device Manager, replaced by a proper printer queue.

Mapping to model

Scenario C: Corrupted Driver Cache

You previously had the printer working. After a Windows update or system cleanup, the driver files were corrupted or removed. The registry still retains the USBPRINT class reference, but the link to the .inf driver file is broken.

Troubleshooting Common Issues