The V2000-C is a standalone RFID access control keypad typically used for securing single doors, gates, or offices. It supports multiple entry methods, including RFID cards (125KHz), 4-to-8 digit PIN codes, or a combination of both. Technical Specifications Power Supply: 12VDC ± 10%.
User Capacity: Up to 1,000–2,000 users depending on the firmware version.
Standard Interface: Supports Wiegand 26 output/input, allowing it to function as an independent controller or an external card reader.
Physical Features: Often features a rugged, weatherproof stainless steel or plastic enclosure with a tamper alarm and doorbell button. Standard Programming Guide
To program the unit, you must first enter System Program Mode. The default management/admin code is typically 12345 or 1234. Command Sequence Enter Programming Mode Press * (or #) + Default Code (e.g., 12345) Change Admin Code 0 + New 4-8 Digit Code + # + Repeat New Code + # Add RFID Card 1 + Present Card to Reader + * (to exit) Delete Single User 3 + User ID (or present card) + # Set Door Open Time 5 + Time in Seconds (e.g., 05 for 5 seconds) + # Exit Programming Press * or 6 (depending on model) Installation and Wiring v2000-c user manual
The installation involves three primary steps: mounting, wiring, and programming.
Mounting: Install the keypad roughly 1.2 meters from the ground.
Wiring: Use the terminals to connect the 12VDC power, the electric lock (Max 3A), and the exit button.
Testing: Always test the keypad with a registered card and the exit button before final assembly. Troubleshooting & Resets RFID Programming Guide The V2000-C is a standalone RFID access control
The V2000-C is factory-calibrated. Re-calibrate only if the device warns you (every 6 months).
| Button | Short Press | Long Press | |--------|-------------|-------------| | ⏻ Power | Turn on/off | – | | ● Record | Start/stop recording | – | | ⚙️ Menu | Enter settings | – | | ▲ (Up) | Navigate up | Toggle mic on/off | | ▼ (Down) | Navigate down | Lock current video | | ▶️ OK / Play | Confirm / Playback mode | – |
If you have recently purchased a V2000-C device—whether it’s a dash cam, an industrial controller, a power inverter, or a specialized piece of lab equipment (as the model number suggests a versatile platform)—you know that success depends on one critical document: the V2000-C user manual.
Finding the right manual can be frustrating. Many users receive a quick-start guide in the box but lack the detailed 100+ page document that explains every beep, blink, and button combination. This article serves as a comprehensive companion to the official V2000-C user manual. We will cover where to find it, how to navigate it, and the essential sections you need to master. Place the device in open air (20-25°C) for 15 minutes
Note: The V2000-C model is used across different industries (most commonly in high-end dash cameras and CNC machine interfaces). This guide focuses on the general principles of the V2000-C documentation, with specific callouts for its most popular application: the V2000-C 4K Dash Camera System.
Modern devices pack immense functionality into small interfaces. The V2000-C is no exception. Without the user manual, you risk:
The V2000-C user manual is not just a pamphlet—it is your legal and operational roadmap.