Alerton BACtalk VLC-1600 is a high-performance, fully programmable input monitoring device designed for high-density input applications within building automation systems. www.acontrols.co.za Quick Specs Overview
: 16 high-resolution (10-bit or 16-bit depending on the model) universal inputs.
: None. This device is strictly for monitoring process variables. Communication
: BACnet MS/TP LAN at up to 76.8 Kbps (Standard) or 115.2 Kbps (E-version).
: 32-bit ARM Cortex-M4F (E-version) or Motorola AZ60 (Legacy). : 24 VAC @ 10 VA max. www.acontrols.co.za Installation Guide 1. Mounting and Environment
: Mount the device in a secure control panel. It uses screw mounting and has maximum dimensions of approximately Operating Range : Ensure the environment stays between ) with 5–95% non-condensing relative humidity. 2. Power Wiring
: Connect to a 24 VAC power source. The unit uses a half-wave rectifier, allowing a single transformer to power multiple VLCs.
: One leg of the 24 VAC must be connected to earth (panel) ground.
: Use the removable header-type screw terminals, which accept 14–24 AWG wire. 3. Configuring Inputs
The VLC-1600's 16 universal inputs are highly flexible and can be configured as follows: : Specifically supports the Alerton BACtalk Microset , Microset II, or Microset 4 intelligent wall sensors. Inputs 1–15 : Can be jumper-configured to accept: Thermistor (3k Ibex or 10k Type II) or Dry Contact.
0–5 VDC or 4–20 mA (4-20 mA requires an external 250-ohm resistor). 0–10 VDC signals. Pulse-type inputs (supported on Inputs 1–3). 4. Communication Setup
: Connect to the BACnet MS/TP LAN using twisted shielded-pair (TSP) cable.
: The device supports auto-baud switching at 9.6, 19.2, 38.4, 76.8, or 115.2 kbps.
: Monitor the communication status LED to verify network activity. 5. Programming Alerton’s VisualLogic toolset to create graphical DDC (Direct Digital Control) logic.
The Alerton VisualLogic VLC-1600 is a high-density, BACnet-compliant input monitoring device designed for building automation systems. Unlike typical field controllers, the VLC-1600 is specialized for monitoring and has no control outputs. It serves as a cost-effective solution for augmenting the monitoring capabilities of a BACnet system, making it ideal for fault detection, diagnostics, and cloud-based analytics. Technical Specifications
According to official documentation from Honeywell Building Automation and Alerton, the device features:
Processor & Performance: Features a 32-bit ARM Cortex-M4F (80 MHz) microprocessor with 512 MB of non-volatile flash memory.
Inputs: Sixteen 16-bit high-resolution universal inputs that are auto-selectable for various signal types: Thermistor: 3k (Ibex) or 10k (Type II). vlc 1600 datasheet
Dry Contact: Pulse inputs supported on inputs 1–15 (max 100 Hz frequency).
Voltage/Current: 0–5 VDC, 0–10 VDC, or 4–20 mA (requires external 250-ohm resistor for mA).
Power Requirements: Operates on 24 VAC @ 50–60 Hz, with a minimum draw of 5 VA.
Communication: Native BACnet MS/TP master device communicating over EIA-485 at auto-baud speeds up to 115.2 Kbps.
Environmental: Rated for operating temperatures between 0 to 158°F (-17 to 70°C) with 5 to 95% RH, non-condensing. Key Features and Compatibility
Programmable Logic: Fully programmable using Alerton's VisualLogic graphical toolset.
Sensor Support: Integrates with intelligent wall sensors like the BACtalk Microset, Microset II, and Microset 4 on input 0 (IN-0) for local data display and setup.
Physical Design: Compact dimensions at 4.9" H x 5.0" W x 1.4" D (125mm x 127mm x 36mm) with removable header-type screw terminals for 14–24 AWG wire.
Backward Compatibility: The newer VLC-1600-E model maintains backward compatibility with older VLC-1600 and VLC-1600C3 models. Application Areas
The VLC-1600 is primarily used in central plant systems and lighting panels where high input density is required to monitor multiple process variables simultaneously. It is often paired with other controllers like the VLC-16160-E, which provides the binary outputs the 1600 lacks. hbt-bms-VLC-1600-E-datasheet.pdf
Alerton VisualLogic VLC-1600 is a high-performance, BACnet-compliant field controller specifically designed as an input monitoring device
. Unlike other controllers in the VisualLogic series, the VLC-1600 is dedicated to high-density input applications and has no control outputs Technical Specifications According to the official Alerton VLC-1600 datasheet , the device features the following hardware capabilities:
: 16 universal inputs with 10-bit resolution (upgraded to 16-bit in the VLC-1600-E variant Configurability
: Software or jumper-selectable for thermistors, dry contacts, 0–5 VDC, 0–10 VDC, or 4–20 mA signals. Pulse Support : Inputs 1–3 can accept pulse-type signals.
: 32-bit architecture (Motorola AZ60 or ARM Cortex-M4F depending on model).
: Non-volatile flash memory for program and data storage, ensuring reliability during power cycles. Internal Speed : Logical loop time of for high-speed data processing.
: 24 VAC @ 10 VA (VLC-1600) or up to 26 VA (VLC-1600-E). It utilizes a half-wave rectifier, allowing multiple units to share a single transformer. Connectivity and Integration Overall Rating for the Query as a Search
The VLC-1600 is a native BACnet controller, designed for seamless integration into building automation systems: : Communicates on a BACnet MS/TP LAN at speeds up to 115.2 Kbps (depending on the model). Smart Sensors : Supports intelligent wall sensors including the Microset, Microset II, and Microset 4 on Input 0. Programming : Fully programmable using Alerton’s VisualLogic graphical toolset. Physical and Environmental Attributes Dimensions : 4.90” H x 5.45” W x 1.40” D (125mm x 138mm x 36mm). Operating Limits
: Temperature range of 0–158°F (-17–70°C) with 0–95% non-condensing relative humidity. Terminations
: Removable header-type screw terminals that accept 14–24 AWG wire. Typical Applications
Because it focuses purely on monitoring, it is often used to augment the input capabilities
of other controllers in central plant systems or lighting panels. It is a cost-effective solution for fault detection, diagnostics, and high-density process variable monitoring. or specific wiring diagrams for the universal inputs? hbt-bms-VLC-1600-E-datasheet.pdf
Title: Technical Specification and Analysis Report: VLC 1600 Series Position Sensors Subject: VLC 1600 Datasheet Review Date: October 26, 2023
⭐⭐⭐ (3/5) – Moderately effective but needs refinement. Without a brand, you may get irrelevant results (e.g., VLC media player or unrelated components).
If you can provide the manufacturer or context (LED driver? battery charger? industrial control?), I can help locate the exact datasheet.
, a high-performance, BACnet-compliant input monitoring device used in building automation systems
" is also used by some manufacturers for large-scale vertical lathes, the Honeywell/Alerton controller Go to product viewer dialog for this item.
is the primary subject for this specific technical designation. Alerton VLC-1600 Go to product viewer dialog for this item. Overview The
is designed for applications requiring high input density to supplement existing building controllers. It serves as a dedicated input monitoring station, providing data for fault detection, diagnostics, and cloud-based analytics without having any control outputs itself. Technical Specifications The following data represents the standard Alerton VLC-1600-E datasheet parameters: Specification Processor 32-bit ARM Cortex-M4F, 80 MHz Memory 512 MB non-volatile flash Inputs 16-bit universal inputs (Qty: 16) Power 24 VAC @ 50–60 Hz; 5 VA min / 26 VA max Communication BACnet MS/TP (up to 115.2 Kbps) Logic Loop Time 100 milliseconds Operating Temp 0°F to 158°F (-17°C to 70°C) Dimensions 4.9" H x 5.0" W x 1.4" D Key Features & Functions
Input Versatility: The 16 universal inputs are jumper-configurable or auto-selectable to accept 3k or 10k thermistors, dry contacts, 0–5 VDC, 0–10 VDC, or 4–20 mA signals.
Graphical Programming: Control logic is developed using Alerton’s VisualLogic® toolset, allowing for easy field modification.
Sensor Support: Integrates with Alerton Microtouch and BACtalk Microset sensors (Microset, Microset II, and Microset 4) specifically on input 0 (IN-0).
Seamless Integration: As a native BACnet controller, it connects directly to the BACnet MS/TP LAN, supporting auto-baud switching for communication flexibility.
Hardware Design: Features removable header-type screw terminals for easy wiring (14–24 AWG) and a half-wave rectified power supply that allows multiple units to share a single transformer. Application Use Cases is ideally suited for: Disclaimer: The term VLC 1600 is used here
High-Density Monitoring: Augmenting the input capacity of central plant systems or lighting panels.
Fault Detection: Continuous monitoring of process variables for early equipment failure detection.
Data Aggregation: Feeding real-time environmental data to cloud analytics platforms for energy optimization. Alternative: VLC-1600 Vertical Lathes VLC-1600 data sheet
Alerton BACtalk VLC-1600 is a high-performance, fully programmable input monitoring device designed for high input density applications within a building management system. A standout feature of the VLC-1600 is its 16 high-resolution, universal inputs
. These inputs are jumper-configurable or software-selectable to support a wide range of signal types, including: Thermistor / Dry Contact 0–5 VDC / 0–10 VDC (requires external resistor) Pulse-type inputs (supported on specific inputs like 1–3) www.acontrols.co.za Key Technical Specifications
32-bit ARM Cortex-M4F (80 MHz) or Motorola AZ60 depending on the model version
Nonvolatile flash memory (up to 512 MB) for program and data storage Communications BACnet MS/TP LAN at speeds up to 115.2 Kbps
24 VAC with a half-wave rectifier, allowing one transformer to power multiple units I/O Capacity 16 Universal Inputs; notably, this specific model has no control outputs Dimensions 4.90” H x 5.45” W x 1.40” D (125mm x 138mm x 36mm)
The device is built for speed, featuring an internal logical loop time of 100 milliseconds
for high-speed DDC program processing. It integrates seamlessly with wall sensors like the BACtalk Microset for technician access and data display. www.acontrols.co.za or specific programming instructions for these universal inputs? VLC-1600 data sheet
In the world of industrial electronics, optoelectronics, and laser systems, model numbers like VLC 1600 often represent a specific hardware class—frequently a high-power laser diode, a visible light communication (VLC) transmitter, or a specialized photonic module. For engineers, the first step before integrating any such component into a system is locating and understanding its datasheet.
The keyword "VLC 1600 datasheet" suggests a search for the official technical document detailing the absolute maximum ratings, electrical characteristics, optical output, mechanical drawings, and thermal management requirements of a device bearing the "VLC 1600" designation.
In this article, we will explore what a typical VLC 1600 datasheet should contain, its likely applications (from free-space optics to industrial ranging), and how to interpret its key parameters.
Disclaimer: The term VLC 1600 is used here as a representative model for a high-performance optical or laser module. While the exact product may vary by manufacturer, the structure and parameters discussed below reflect industry standards for devices in this class.
| Parameter | Condition | Min | Typ | Max | Unit | |-----------|-----------|-----|-----|-----|------| | Peak Wavelength (λp) | IF=50mA | 650 | 660 | 670 | nm | | Spectral Bandwidth (Δλ) | IF=50mA | - | 20 | - | nm | | Radiant Power (Φe) | IF=100mA | 8 | 12 | - | mW | | Viewing Angle (2θ½) | - | - | 30 | - | degrees | | Rise/Fall Time (tr/tf) | IF=50mA, 5V | - | 10 | - | ns |
Note: For VLC applications, rise/fall time and modulation bandwidth (MHz) are critical. Look for a typical value like 50-100 MHz.
If you cannot find an official VLC 1600 datasheet, the part may be: