Backup Image Patched — Vu Solo2

Creating a full backup image of your Vu+ Solo2 is the best way to save your exact configuration, including plugins, channel lists, and softcams, so you can restore it quickly if something goes wrong. Phase 1: Creating the Backup

The method varies slightly depending on which Enigma2 image you are currently running (e.g., OpenATV, OpenViX, or Black Hole). OpenATV:

Insert a FAT32-formatted USB stick or ensure your internal HDD is mounted.

Press the Blue button on your remote to open the Quick Menu. Navigate to Software Manager > Complete Backup.

Select your storage device (HDD or USB) and press OK (Green button) to start. OpenViX: Press Menu > Setup > Vix > Image Manager. Press the Green button (New Backup).

The system will create a .zip file containing your full image. Black Hole:

Press the Blue button > Blue button again (Black Hole Extra Settings). Select Black Hole Full Backup.

Choose the destination (USB or HDD) and wait for the process to finish. Phase 2: Storing the Backup for Flashing

How to USB flash upgrade VU+ Solo2 - Satellite Support Forum vu solo2 backup image

The Boss * Prepare a USB stick, format FAT32. I'd recommend using this HP Format tool. * Download the image you would like to use, Satellite Support Forum Receivers:Vu - OpenPLi Wiki

Creating a backup of your Vu+ Solo2 is essential for saving your customized settings, channel lists, and plugins. You can perform a backup either through the built-in Software Management tools of your specific firmware (Image) or by using a universal plugin like BackupSuite. Method 1: Using the BackupSuite Plugin (Recommended)

This is the most reliable "universal" method for creating a full USB-flashable image. Install BackupSuite:

Open your receiver's Plugin Menu (usually via the Green button). Select Download Plugins (Green button again).

Navigate to Extensions and find backupsuite. Install it and restart your GUI. Prepare a USB Drive:

Insert a FAT32-formatted USB stick into the front or rear USB port of your Solo2.

Ensure the stick is "mounted" (usually visible in Menu > Setup > Storage Devices). Run the Backup: Go to Menu > Plugins > BackupSuite. Select Full Backup.

The process will take 5–10 minutes. When finished, you will have a folder named vuplus on your USB stick. Creating a full backup image of your Vu+

This folder contains the complete "clone" of your box, which can be used to flash any other Solo2.

Method 2: Image-Specific Backup (OpenViX / OpenATV / BlackHole)

Most modern images have built-in managers that create a .zip or a vuplus folder structure. OpenViX / OpenATV: Press Menu > Setup > Software Management. Select Image Backup. Choose your storage location (HDD or USB).

Press the Red button (often) or follow the on-screen prompt to "Start Backup." BlackHole:

Press Menu > Setup > Full Backup (or look for "BlackHole Full Backup" in the Blue Panel). Follow the prompts to save to your external media. How to Restore / Flash Your Backup

To restore the backup you just created, treat it like a fresh image install: Power off your Vu+ Solo2 using the rear power switch.

Insert the USB stick containing the vuplus/solo2 folder into the front USB port. Power the box back on.

When the front display says "Update? Press Power", press the Power button on the front panel of the receiver (not the remote). Press Menu → Setup → Software Management or

The display will show "Flashing" or "Programming." Do not power off until it says "Finished" and reboots automatically. Important Tips

Storage Space: A full backup is typically 150MB to 300MB. Ensure your USB or HDD has enough free space.

Personal Data: Remember that a "Full Image Backup" includes your private details, such as line configs and passwords. Only share these files with people you trust.

Official Support: For the latest firmware versions and community support, visit the Vu+ Community Forum or LinuxSat Support.

How to Create a Backup Image on Vu+ Solo2

Most modern Enigma2 images include a built-in backup tool. Here’s a general method:

Using the image’s native backup manager (e.g., OpenATV, OpenPLi, OpenViX):

Press Menu → Setup → Software Management or Flash Image/Backup.
Select Backup System Settings (saves configs) or Create Full Backup Image.
Choose the destination (usually /media/hdd/ or /media/usb/).
Start the backup. The system will create a folder named like openatv-5.4-vusolo2-20250325_backup.
Once done, you’ll find a compressed file (e.g., vuplus/solo2/ with kernel and root files).

Alternative – Using ImageManager (common in OpenViX/OpenATV):

Blue button → ImageManager → Create new full backup.

Problem 2: "No signal after flashing"

Cause: The backup had "Tuner A" set to a satellite you don't have (e.g., Hotbird 13E instead of Astra 28.2).
Fix: Do not delete the image. Just go to Tuner Config and change it. If the tuner says "Nothing connected," you may need to flash a Solo2 SE backup instead of a Solo2 backup (different tuner drivers).

What is a Vu+ Solo2 Backup Image?

A backup image is a complete, compressed snapshot of the entire operating system (flash memory) of your Vu+ Solo2. It includes:

The base Enigma2 image (e.g., OpenPLi, OpenATV, BlackHole, VTi, OpenViX).
All installed plugins (e.g., softcams like OSCam/CCCam, skins, IPTV players, file managers).
All configuration files (satellite/channel lists, tuner settings, network settings, cam configurations, and automounts).

Instead of setting up everything from scratch after a crash or on a new box, you can flash a backup image to restore the system to an exact working state.