Woodwop 5.0 Tutorial -

Development of a Structured Tutorial Framework for WoodWOP 5.0 CNC Programming

Author: [Your Name/Institution] Date: April 25, 2026 Version: 1.0

Part 7: Simulation – Not Optional

In WoodWOP 5.0, the F8 key (Simulate) is sacred. woodwop 5.0 tutorial

1. Click F8. The 3D model appears.
2. Drag the slider at the bottom right. Do not run full speed; watch the tool move point by point.
3. Check "Collision Detection" in the simulation settings. The software will turn the part red if the tool holder would hit the wood.

Never send a program to a $150,000 Weeke machine without doing this first. Development of a Structured Tutorial Framework for WoodWOP 5

---

WoodWOP 5.0 — Beginner’s Tutorial (Step‑by‑Step)

WoodWOP 5.0 is a widely used CNC programming environment for woodworking machines. This tutorial gives a concise hands‑on introduction to create a simple part, generate a toolpath, simulate it, and postprocess for a machine. Assumes WoodWOP 5.0 installed and basic familiarity with CNC concepts. Click F8

Module 3: Variables and Parametric Programming

• Topics: Local variables (#L1...#L50), global part variables (#S1...#S50), arithmetic operations (+ - * /).
• Key Functions: W (width), H (height) for part geometry inheritance.
• Exercise: Write a single program that drills a grid of 5x5 holes regardless of panel size (use variables to compute spacing).
• Code Example:

  ; Parametric grid drilling
  #L1 = W / 6   ; X spacing
  #L2 = H / 6   ; Y spacing
  FOR #I = 1 TO 5
    FOR #J = 1 TO 5
      G0 X=#I*#L1 Y=#J*#L2
      G1 F=#L12 Z=-8
      G0 Z=10
    ENDFOR
  ENDFOR