Ys-sxt-v4.2 B Hot!

General Steps to Create or Find a Guide

Server Configuration (Sharing)

YS-SXT boards are known for their simple sharing setup:

1. Go to Menu > Network Setup > CCcam Client Setup (or similar).
2. Enter your Clines (C: line details).
3. Enable the line and ensure the status turns to ONLINE.

Network Setup

1. Navigate to Menu > Network Setup > Network Config.
2. Select Wifi or LAN.
3. If using LAN, ensure IP Mode is set to DHCP. If Wifi, select your SSID and enter the password.
4. Press Apply/Save.

Configuration tips

• Start with conservative transmit power and increase only as needed to meet SNR targets; too much power can cause adjacent-channel interference.
• Use narrower channel widths (e.g., 20 or 40 MHz) for noisy environments to improve reliability.
• Enable QoS (if available) to prioritize latency-sensitive traffic (VoIP, video).
• Lock management access to specific IPs and enable HTTPS for the web UI.
• Schedule off-peak firmware updates and keep a backup of working configuration.